On Windows 10, a Bluetooth mouse that keeps disconnecting usually points to one of three layers: the mouse battery, USB or Bluetooth adapter power, or Windows radio settings. Start by turning off Battery Saver while you test, then clear the adapter’s power-saving checkbox in Device Manager.
A Bluetooth mouse pairs directly to the PC’s Bluetooth radio. That is different from a mouse that uses its own USB receiver, and mixing them up sends you to the wrong fix.
Watch the pattern before changing settings. Idle-only drops usually point to power saving. Random dropouts during active use may point more toward the adapter, driver, or service. If opening Bluetooth settings makes the mouse work again, Windows may be refreshing a stuck Bluetooth state rather than proving that pairing is the problem.
What is most likely causing it?
The most common cause is Windows power management, especially when the mouse disconnects after a short idle period or wakes back up only after you open Bluetooth settings. Less often, the Bluetooth service, the driver, or USB selective suspend interrupts the radio. Start with the layer that matches the symptom pattern, not with random re-pairing.
Likely causes
- Idle-only disconnects: adapter power saving first.
- Random active-use dropouts: driver or Bluetooth Support Service next.
- Works after opening Bluetooth settings: service or adapter state refresh issue.
- USB Bluetooth adapter: USB selective suspend and USB Root Hub power settings.
- Built-in Bluetooth radio: adapter power management and Bluetooth HID device settings.
Say your mouse drops only after 5 to 10 minutes of sitting still, then reconnects after a click. That pattern fits sleep or suspend behavior much better than a bad pairing record.
Suppose the pointer freezes during a drag or while scrolling, then comes back without a full reboot. That points away from a simple idle timeout and toward the Bluetooth service, driver state, or USB power handling.
Decision table
| Symptom pattern | Most likely layer | First fix to try |
|---|---|---|
| Disconnects only when idle | Windows power management | Device Manager > Bluetooth adapter > Properties > Power Management > clear “Allow the computer to turn off this device to save power” |
| Random dropouts during active use | Driver or Bluetooth Support Service | Restart Bluetooth Support Service in services.msc, then update the Bluetooth driver |
| Works again after opening Bluetooth settings | Stuck Bluetooth state refresh | Restart Bluetooth Support Service, then restart the PC |
| PC uses a USB Bluetooth adapter | USB power handling | Check USB selective suspend and the USB Root Hub power settings |
| PC uses a built-in Bluetooth radio | Adapter or HID power settings | Check the Bluetooth adapter and the Bluetooth HID device under Human Interface Devices |
Bluetooth adapter power settings
Windows 10 Bluetooth power management is often the first place to look. Microsoft advises disabling the device power-saving option in Device Manager, and How-To Geek points to the Power Management tab as the place where the key checkbox appears. This applies to Intel, Realtek, and Qualcomm adapters alike. (Microsoft Support)
- Right-click Start and open Device Manager.
- Expand Bluetooth. If you do not see it there, check Human Interface Devices for a Bluetooth HID device entry.
- Right-click the Bluetooth adapter, choose Properties, then open the Power Management tab.
- Clear Allow the computer to turn off this device to save power.
- Also open the Bluetooth HID device properties, if present, and clear the same checkbox there.
- Restart the PC and retest the mouse.
Microsoft Support lists this issue for both Windows 10 and Windows 11, and Rapid Gen Lab says Windows power management is the most common culprit. Their advice matches the Device Manager fix, which often solves the problem quickly. If the checkbox returns after an update, check it again after the update finishes.
Does Bluetooth Support Service need a restart?
Yes, if the mouse reconnects only after opening Bluetooth settings or if active-use dropouts continue after the adapter power setting is fixed. Bluetooth Support Service is a Windows service that helps maintain Bluetooth connections. Microsoft includes restarting it as a troubleshooting step, so it belongs high on the list when the adapter setting alone does not hold.
- Press Win + R, type
services.msc, and press Enter. - Find Bluetooth Support Service.
- Right-click it and choose Restart.
- Open its Properties and set Startup type to Automatic.
- Sign out, or restart Windows 10, then test the mouse again.
If the service restarts cleanly but the mouse still drops, the issue is probably lower down in adapter power or USB suspend handling. If the service will not stay running, the driver is a stronger suspect than the mouse itself.
Battery Saver and USB selective suspend
Battery Saver mode can interrupt Bluetooth connectivity, and Microsoft recommends turning it off while you test. Rapid Gen Lab also points to low battery as a trigger, so recharge the mouse battery or fit fresh batteries first, then remove Windows power saving from the test. If the PC’s Bluetooth radio is a USB device, USB selective suspend can be the real fault instead of the Bluetooth menu itself.
- Open Settings > System > Battery.
- Turn off Battery Saver or any battery-saving mode that is active.
- Open Control Panel > Hardware and Sound > Power Options.
- Next to the active power plan, choose Change plan settings > Change advanced power settings.
- Expand USB settings > USB selective suspend setting, then set it to Disabled.
- If your Bluetooth radio is a USB adapter, also open Device Manager > Universal Serial Bus controllers, then check any USB Root Hub properties for power-saving options.
That USB Root Hub check matters because a Bluetooth radio can be controlled through USB power settings even when the mouse itself does not use a USB receiver. If the radio is built in, inspect any USB hub entries tied to that controller path.
Should you update the Bluetooth driver?
Yes. Microsoft recommends updating Bluetooth drivers, and that step belongs after power settings and service checks if the mouse still drops. A driver refresh can fix repeated disconnects when the adapter is working, but its power-handling state is stale. If updating fails, uninstalling and reinstalling the adapter driver is the next clean step.
- Open Device Manager.
- Expand Bluetooth, then right-click the adapter.
- Choose Update driver and let Windows search automatically.
- If that does not help, return to the adapter, choose Uninstall device, then restart the PC.
- After Windows reloads the driver, recheck the power-management box and test again.
- Re-pair the mouse only after the adapter and power settings are fixed.
Do not start by removing and pairing the mouse again. That can hide the real fault for a while, then the dropouts return the next time Windows changes the adapter state.
How do I stop my Bluetooth mouse from disconnecting on Windows 10?
Use the symptom pattern to choose the fix order. Idle-only disconnects usually start with adapter power management. Active-use dropouts usually move to the Bluetooth service and driver. If the mouse only recovers after opening Bluetooth settings, treat that as a state-refresh clue and restart the service first. Re-pairing comes later, not first.
- Turn off Battery Saver while you test.
- Clear Allow the computer to turn off this device to save power for the Bluetooth adapter and any Bluetooth HID device.
- Restart Bluetooth Support Service in
services.msc. - Disable USB selective suspend if the Bluetooth radio uses USB.
- Update or reinstall the Bluetooth driver.
- Only then remove the mouse from Bluetooth and pair it again.
A common first-timer mistake is to pair the mouse again after every dropout. That can make a temporary state issue look like a pairing fault, even when Windows is actually putting the radio to sleep.
Still not working?
If the fix keeps reverting after Windows Update or driver changes, go back through the list in the same order. Power settings can come back after a driver refresh. If the problem follows one machine but not another, try a different Bluetooth adapter on the problem PC. If the mouse drops on multiple PCs after fresh batteries and a clean pairing, the mouse hardware is more likely at fault.
- Repeat the adapter power check after any Windows Update or driver install.
- Test with a different Bluetooth adapter if the PC uses a USB Bluetooth radio.
- Test the mouse on another Windows 10 PC with Bluetooth turned on and Battery Saver off.
- If the issue follows the mouse across multiple PCs, replace the mouse or contact the vendor.
Prevention: After you fix it, keep the Bluetooth adapter’s power-saving checkbox disabled and leave USB selective suspend off on systems that use a USB Bluetooth radio. That keeps Windows from putting the connection into a sleep cycle again.
Frequently asked questions
Why does my microsoft bluetooth mouse keep disconnecting?
The most common reason is Windows power management, not the pairing itself. Start with Device Manager, clear Allow the computer to turn off this device to save power on the Bluetooth adapter, then restart Bluetooth Support Service in services.msc if the mouse still drops.
What power settings cause bluetooth mouse dropouts on windows 10
Check three settings first: the Bluetooth adapter’s Power Management tab, Battery Saver in Settings > System > Battery, and USB selective suspend in Control Panel > Power Options. If the PC uses a USB Bluetooth radio, also check the USB Root Hub entries.
Does battery saver make bluetooth mouse disconnect?
Yes, it can. Turn Battery Saver off while you test, then retest the mouse before changing anything else. Microsoft includes that step in its troubleshooting guidance, so it is a valid first check when disconnects happen on a laptop or tablet.
Should I update bluetooth drivers if my mouse keeps disconnecting?
Yes. In Device Manager, right-click the Bluetooth adapter and choose Update driver. If that does not fix it, uninstall the adapter, restart Windows, and then recheck the adapter power setting before pairing the mouse again.
How do I check if usb selective suspend is causing bluetooth dropouts?
Open Control Panel > Hardware and Sound > Power Options, then disable USB selective suspend setting. If the Bluetooth radio is a USB adapter, also inspect the USB Root Hub power settings in Device Manager. Retest after a full restart.
Why does opening bluetooth settings make my mouse work again?
That usually means Windows is refreshing a stuck Bluetooth state. Restart Bluetooth Support Service in services.msc, then reboot. If that helps only briefly, the adapter’s power-management checkbox or USB selective suspend is still likely turning the radio off.