Change a stylus pen tip by matching the exact model nib, pulling the old tip straight out if the design allows, and stopping if the pen uses a sealed or non-replaceable tip. A mismatched tip can cause poor pressure response, skipping, screen wear, or a broken internal sensor. This guide covers model matching, safe removal, stubborn-tip fixes, and quick checks to confirm the pen works after the swap.
What you'll need
- A replacement nib pack that matches the exact pen model and device family.
- A nib removal tool, or fine tweezers if the maker allows them.
- A clean cloth or small case for spare nib storage.
- Optional: the pen maker’s included puller, if it came in the box.
- Your stylus or S Pen, powered off or disconnected if the device supports that.
How do you know the tip needs replacing?
Replace the nib when the tip looks flattened, feels rough, skips on the page or screen, or changes pressure response from stroke to stroke. If the body, battery, or pressure sensor is the real problem, a new nib will not fix it. Check that first.
Check the nib before you replace it
Look for a flat edge, a shiny worn patch, or a bent point. A nib that drags or catches on glass often shows visible wear. A nib that feels loose in the barrel can also trigger inconsistent pressure sensitivity.
Separate nib wear from deeper pen faults
If pressure drops in every app, the fault may be the pen electronics, not the nib. If the tip is visibly worn but input still tracks normally, the nib is the likely problem. If strokes jump only in one app, check that app’s pen settings and calibration first.
Say your Galaxy S24 Ultra S Pen starts skipping on one corner of the screen after the tip looks blunt. A replacement nib is the first thing to try. Suppose the pen still misses pressure after a fresh nib goes in and the barrel is clean. That points to a deeper fault.
Which devices commonly use replaceable tips?
Many Samsung S Pen models use replaceable nibs. Some third-party styluses also use replaceable tips, but the nib shape, length, and material vary by model. A replacement nib pack should match the exact pen family, not only the tablet or phone brand.
How do you change a stylus pen tip?
Power off or disconnect the pen if the device supports that. Pull the old nib straight out with steady, even pressure, then insert the new nib until it clicks into place. Do not twist hard or pry sideways, because that can bend the barrel or crack the internal guide.
- Confirm the pen model and the correct nib style on the package.
- Power off the device or disconnect Bluetooth if the pen uses it.
- Grip the nib with the removal tool, then pull straight out.
- Inspect the barrel opening for dust or a broken nib fragment.
- Align the replacement nib with the opening and push it in evenly.
- Stop when it seats securely; do not force extra depth.
- Test writing, drawing, and pressure response in a pen app.
How far should the new nib go in?
Seat the nib until it feels firm and no longer shifts under light finger pressure. Do not keep pushing after resistance rises, because the pen body or internal sensor may sit deeper than the nib channel. A correct fit should feel stable, not crushed.
How do you change an S Pen tip?
Samsung S Pen nib compatibility generally depends on the device family and the specific pen variant. Many Galaxy phones and tablets use replaceable tips, but the nib shape can differ between models. Use the included removal tool when possible, because it grips the nib straight and lowers the chance of barrel damage.
How do you change an S Pen tip on Galaxy S24 Ultra?
The Galaxy S24 Ultra appears to use a replaceable S Pen nib, and the replacement nib pack should match the S Pen family for that device. Remove the nib with Samsung’s puller or fine tweezers that grip straight, then insert the new nib until it seats. Test handwriting and pressure in Samsung Notes afterward.
How do you change an S Pen tip on Tab S9?
The Galaxy Tab S9 family also appears to use replaceable S Pen nibs, but the replacement pack still needs to match the pen model. Pull the old tip straight out, insert the new one, and check line thickness changes in a note app. If strokes still skip, check for screen debris or a pen setting issue.
How do you change an S Pen tip on Tab S8, Tab S9 FE, and Note 10?
Galaxy Tab S8, Galaxy Tab S9 FE, and Galaxy Note 10 devices may use different S Pen variants, so exact nib matching matters. Use the device’s own nib pack or a clearly listed compatible pack. If the nib is flush with the barrel, stop and use the puller rather than pinching harder.
How do you change a stylus pen tip on a Huion pen?
Huion pens often use replaceable nibs, but the removal method varies by model and some boxes include spare nibs. Check the exact pen model before pulling anything out, because a Huion nib pack for one stylus may not fit another. Use the maker’s tool if it came with the pen.
How do you change a stylus pen tip on a Huion pen?
Use the pen’s included puller or a compatible nib tool, grip the nib straight, and pull it out evenly. Insert the new nib until it sits snugly. If the pen uses felt nibs, expect a different feel than plastic or POM nibs, and test pressure after replacement.
Where are spare nibs usually stored?
Spare nibs often ship in a small holder, a plastic tube, or a compartment in the tablet box. Keep them clean and dust-free, because grit can scratch the barrel or screen. A closed case also keeps tiny replacement parts from disappearing.
What if the nib is stuck or broken?
If the nib sits flush and cannot be gripped, use the removal tool’s jaws rather than metal pliers that can crush the barrel. If the nib snaps during removal, stop and inspect the opening before trying again. A broken fragment inside the barrel is a deeper problem than normal nib wear.
What if the replacement nib gets stuck or breaks?
Remove the pen from the device, then try a straight pull with the maker’s tool. If the tip is flush, use the narrowest safe grip point and pull without twisting. If the nib fragments, do not ram a second nib in; that can wedge debris deeper.
When should you stop and suspect barrel damage?
Stop if the nib will not move at all, if the barrel opening looks cracked, or if the pen starts registering erratic input after a partial removal. In that case, a damaged guide or sensor is more likely than a simple tip problem. Replacement nibs will not correct that fault.
How do you verify the pen is fixed after the swap?
After replacement, test handwriting, drawing, and pressure sensitivity in a note or sketch app. The line should start cleanly, pressure should rise and fall normally, and supported tilt should behave the same way it did before the tip wore out. If the pen still skips, look beyond the nib.
What should you test first?
Open a pen-supported app, write short strokes, then make slow and fast diagonal lines. Check whether pressure sensitivity changes smoothly and whether the pen lifts and lands cleanly. If supported on the device, test tilt by shading at a shallow angle.
If that didn't work, try this next
- Re-seat the nib by removing and reinserting it once.
- Clean the screen and the nib with a dry microfiber cloth.
- Open another pen app and repeat the pressure test.
- Check the device’s pen or S Pen settings for calibration options.
- Swap in a second compatible nib pack if the first nib feels loose.
- If problems remain, suspect a pen body fault rather than the tip.
Stylus tip checklist table
| Pen family | Nib style | Removal method | Signs the tip is worn | Signs the pen has a deeper fault | What to test after replacement |
|---|---|---|---|---|---|
| Samsung S Pen for Galaxy S24 Ultra | Model-specific replaceable nib | Built-in puller or straight-grip tweezers | Flattening, scratchy feel, skipped strokes | Pressure stays inconsistent across apps | Samsung Notes pressure and handwriting flow |
| Samsung S Pen for Galaxy Tab S9 | Replaceable nib pack matched to pen family | Samsung puller or careful straight pull | Loss of glide, rough edge, irregular line width | Calibration trouble or dead input zones | Line smoothness and tilt, if supported |
| Samsung S Pen for Galaxy Tab S8 | Compatible S Pen nib, model-matched | Puller, then straight insertion | Rough drag, tip wobble, pressure inconsistency | Pen responds late or not at all | Short strokes and pressure ramp-up |
| Samsung S Pen for Galaxy Tab S9 FE | Replaceable nib, device-matched | Included tool or safe tweezers | Flattening and skipping on paper-feel surfaces | Persistent skipped input after a fresh nib | Note app writing and corner-to-corner tracking |
| Samsung S Pen for Galaxy Note 10 | Replaceable nib, exact model compatibility matters | Puller or careful straight extraction | Visible wear, reduced glide, uneven pressure | Internal sensor or barrel damage | Writing latency and pressure response |
| Huion stylus | Replaceable nib, often felt, plastic, rubber, or POM | Maker’s tool, or the model’s stated method | Flattening, roughness, skipping, loose fit | Pressure loss or broken nib guide | Brush pressure, line taper, and tilt if supported |
Common mistakes
Using the wrong nib model is the most common error. A nib that looks close enough can still sit too deep or too loose. Match the exact pen family and device ecosystem before you swap anything.
Forcing a stuck tip is another common mistake. Pull straight, stop if the nib will not move, and switch to the proper tool instead of squeezing harder.
Skipping the post-swap test is the last mistake to avoid. A fresh nib should be checked for pressure sensitivity, skipped strokes, and tilt behavior before you assume the pen is fixed.
Frequently asked questions
Can you change an S Pen tip?
Many Samsung S Pen models use replaceable nibs, including several Galaxy phones and tablets. The key is model-specific compatibility. Use the nib pack listed for your exact S Pen family, then confirm pressure sensitivity in Samsung Notes or another pen-enabled app.
What tool do I use to remove a stylus nib safely?
A nib removal tool is the safest choice because it grips the tip and pulls straight out. Fine tweezers can work if the maker allows them, but they should not twist the barrel. Avoid metal pliers unless the pen maker specifically approves them.
How do I know when my stylus tip needs replacing?
Look for flattening, roughness, skipping, or a change in pressure consistency. If the nib starts catching on the screen or leaves uneven strokes, replacement is due. If a new nib does not fix those symptoms, check the pen body and app settings.