Put the earbuds in Android’s Bluetooth list, set them as the Media audio output, and use the maker app for controls if available. Skip those steps and you can get silent earbuds, missing mic audio, or controls that do nothing. This guide covers setup, touch controls, app features, and fixes for the common connected-but-not-working cases.

What you need

  • An Android phone with Bluetooth switched on
  • Wireless earbuds charged enough to enter pairing mode
  • The charging case nearby for reset or re-pairing
  • The companion app, if your model has one
  • USB-C cable and charger for the case

How do you pair earbuds on Android?

Start with Bluetooth on, put the earbuds into discoverable pairing mode, then choose them from Android’s device list. If they were already paired before, use the Forget option first and pair again. That clears stale settings and often fixes earbuds that connect but do not behave normally.

Pair them the first time

  1. Open Settings > Connected devices > Pair new device.
  2. Put the earbuds in pairing mode until the indicator flashes as the manual describes.
  3. Tap the earbuds name in the Android list.
  4. Accept the pairing prompt.

If pairing fails or returns to an old profile

  1. Open Settings > Connected devices > Paired devices.
  2. Tap the earbuds name, then choose Forget or Unpair.
  3. Power the earbuds off, then back on in pairing mode.
  4. Pair again from Pair new device.

Say your earbuds connect in the list, but audio still routes to the phone speaker. Open Settings > Connected devices > Bluetooth, tap the earbuds name, and confirm Media audio is enabled. That setting matters more than the pairing pop-up.

Android earbuds setup checklist

Step Where to find it on Android What to verify
Turn on Bluetooth Settings > Connected devices > Bluetooth Bluetooth is on before you open pairing mode on the earbuds
Start pairing search Settings > Connected devices > Pair new device The earbuds name appears in the scan list
Confirm media output Settings > Connected devices > Bluetooth > earbuds name Media audio is enabled for sound playback
Check call routing Phone app call screen or earbuds settings page Calls use the earbuds microphone, not the handset mic
Install the companion app Google Play Store The app opens and shows the correct earbud model
Update firmware Companion app > firmware or device update page The app reports the latest version after charging and reconnecting

How do you use earbuds controls on Android?

Use the touch panel or button actions assigned by the maker app for play, pause, track skipping, assistant access, and volume control on some models. Android itself usually does not set those gestures; the earbud firmware and companion app do. If the controls seem dead, check both app permissions and the touch-control map.

Use the basic controls

  1. Open the companion app, then go to Controls or Touch controls.
  2. Check the assigned tap pattern for play/pause and next track.
  3. Use the press or swipe action for volume if your model supports it.
  4. Assign assistant access to a long press only if you actually want it.

Switch ANC and transparency modes

  1. Open Quick Settings or the companion app, depending on the model.
  2. Toggle ANC for buses, trains, or office noise.
  3. Switch to Transparency when you need traffic sound or conversation.

A common first-timer mistake is leaving ANC on during a quiet call on a desk phone. That can make speech feel dull. A quick toggle to transparency or standard mode is often better for indoor calls.

How do you get better sound and call quality?

How do you get better sound and call quality?
A smartphone sits beside open wireless earbuds on a wooden desk

Sound quality on Android depends on both the earbuds and the phone. SBC is commonly the baseline, AAC is also common, and some models add LDAC or aptX variants. Support varies by phone and earbud model, so check both sides before expecting higher-rate audio. Wireless earbuds for Android often support LDAC and Hi-Res audio for higher-quality streaming.

Check codec and app features

  1. Open the companion app and look for Sound, EQ, or Audio codec.
  2. Enable the codec your phone supports if the app offers a choice.
  3. Use the equalizer to cut harsh treble or add bass in small steps of 1 to 2 dB, then recheck speech and music.
  4. Install the firmware update after charging the case and earbuds.

Set up calls and multipoint

  1. In the app, open Call settings or Microphone.
  2. Turn on noise suppression if your model offers it.
  3. Enable multipoint if you switch between phone and laptop.
  4. Keep the earbuds paired to both devices so you do not have to re-pair each time.

soundcore says its Android earbuds can use up to 6 microphones, and soundcore claims Bluetooth 5.3 multipoint technology for staying connected to two devices. Those features matter most for calls and laptop switching, but only on models that include them.

Suppose your phone supports LDAC but the earbuds only offer SBC and AAC. You still get sound, but you will not get LDAC performance because both sides must support the same codec.

Battery and charging matter here too. soundcore claims up to 40 hours of continuous playtime on a single charge. If the case no longer tops up the buds fully, charge the case with USB-C and recheck the charging contacts before blaming sound quality or codec choice.

Common mistakes

Common mistakes
Black wireless earbuds hover above a smartwatch on a white background

Most “connected but not working” cases come from one of seven places. The fix is usually a settings path, a reset, or a re-pair, not a new phone.

Failure case Likely cause Fix
Pairs but no sound Media audio is not enabled, or the phone is sending sound to another device Settings > Connected devices > Bluetooth > earbuds name, then turn on Media audio and disconnect other outputs
Only one earbud works Mono mode, mis-synced buds, or one bud is not charging Put both buds in the case for 10 seconds, then remove them together and re-pair if needed
No mic on calls Call audio is routed to the phone mic, or the app permissions are off Open the call screen, choose the earbuds as the audio device, then check Settings > Apps > [app] > Permissions
Controls not responding Touch map is disabled, dirty sensors, or gestures were remapped in the app Open the companion app, restore the default control layout, then clean the touch area with a dry cloth
App won’t connect Old app version, missing permissions, or the earbuds are already tied to another phone Grant nearby-device and Bluetooth permissions, force stop the app, then reconnect from Settings > Connected devices
Audio delay Codec fallback, video app buffer, or multipoint switching lag Try SBC or AAC in the app, close the second device, or use the video app’s low-latency mode if available
Frequent disconnects Low battery, interference, or too much distance from the phone Charge the case, stay within one room, and forget then re-pair if the device list looks stale

Fix the stuck cases in order

  1. Check Settings > Connected devices > Bluetooth and confirm the earbuds are connected for media and calls.
  2. Open the companion app and confirm controls, EQ, ANC, and microphone settings are enabled.
  3. Charge the earbuds and case with USB-C for about 15 minutes before trying again.
  4. Forget the earbuds, reset them from the case, and pair again.
  5. Reinstall the companion app only if the device still will not sync or update.

Water resistance helps, but it is not a cure for bad charging or bad fit. IPX4 and IPX5 models are generally suitable for sweat and exercise, though the exact protection still depends on the model. That makes them better for workouts than for showers or pool use.

What does the model support?

What does the model support?
Wireless earbuds in a charging case with battery indicators visible

Do all wireless earbuds work with Android? Most do for basic playback, but advanced features vary by phone, Android version, and earbud model. LDAC, aptX variants, multipoint, ANC, and richer app controls only appear when the hardware and software line up.

Useful model and feature checks

  • Look for SBC and AAC first; those cover basic Android audio on many models.
  • Check for LDAC only if the earbuds and the phone both list it.
  • Check aptX variants only on phones and earbuds that support them.
  • Use multipoint for phone plus laptop if the model includes it.
  • Look for IPX4 or IPX5 if you want workout protection.
  • Check ANC and transparency mode in the app, not just on the box.

For Android buyers comparing models, Sonys WF-1000XM5 support SBC, AAC, and LDAC, and Android Authority says they have excellent noise canceling and isolation. Android Authority also notes they are 25% smaller and 20% lighter than predecessors, with XS-L memory foam ear tips. Those details matter if fit, isolation, and codec support are priorities.

Soundcore says LDAC is an Android-exclusive standard, but that still does not mean every Android phone gets it. The phone must support LDAC, and the earbuds must support it too.

Keep reading

Frequently asked questions

How to use wireless headphones with android phone

Use the same Bluetooth path: turn Bluetooth on, pair the headphones, and set them as the media output device. If the headphones include a maker app, use it for ANC, EQ, and button maps. The steps are the same for over-ear models and true wireless earbuds.

How do wireless earbuds work with android?

Android sends audio over Bluetooth, then the earbuds play it and return mic audio for calls. Features such as ANC, transparency mode, touch controls, and EQ usually come from the earbuds app. Codec support, including SBC, AAC, LDAC, and aptX variants, depends on both devices.

Why won't my wireless earbuds pair with my android phone

The usual causes are Bluetooth being off, the buds not being in pairing mode, or an old pairing record blocking the new one. Open Settings > Connected devices > Bluetooth, forget the earbuds, reset them, and try pairing again with the case nearby and both buds charged.

How do I get better sound from wireless earbuds on android?

Check codec support first, then use the companion app’s EQ and firmware update page. If the app offers LDAC or aptX options, choose only what your phone supports. For clearer speech, try a mild EQ cut around the bass instead of boosting everything at once.