For many LG TVs, the fastest path is HDMI ARC or eARC. LG’s support materials for TV sound output and TV-side device control note that menu labels can vary by webOS version and region, so the exact wording may differ slightly even when the function is the same. If HDMI ARC/eARC is unavailable, optical is the usual fallback. The wrong port or menu setting can leave you with no audio, delay, or a remote that controls only the TV. Below, you get the fastest setup path, then a scenario-based fallback guide for port, feature, and symptom.

What you'll need

  • An HDMI cable for ARC or eARC, or an optical cable for the fallback path
  • The LG TV remote and the soundbar remote
  • Access to the TV audio settings and input menu
  • A phone with the LG ThinQ app for supported Wi‑Fi models
  • Wi‑Fi login details if the soundbar supports app setup

Start with the port labels. On many LG TVs, the relevant path is Settings > Sound > Sound Out, but the exact labels can differ by webOS version or region; LG also documents Simplink under the TV’s general device or HDMI settings. If the TV has HDMI ARC or eARC and the soundbar has HDMI Out (ARC), use that cable path first. Then change the TV sound output to the soundbar, since the cable alone does not always switch audio away from the TV speakers. LG’s manuals also note that ARC/eARC and one-remote control depend on both devices supporting the feature and the TV’s HDMI-CEC/Simplink setting being enabled.

  1. Check the TV for an HDMI port labeled ARC or eARC, and check the soundbar for HDMI Out (ARC).
  2. Connect one HDMI cable between those two ports.
  3. On the TV, open Settings > Sound > Sound Out, then choose the HDMI ARC/eARC output.
  4. On the TV, open Settings > General > Devices > HDMI Settings, then turn on Simplink.
  5. Set the soundbar to the ARC/eARC input if it does not switch by itself.
  6. Raise the volume with the TV remote and confirm the sound now comes from the soundbar.

Say your LG TV has two HDMI ports and only one is marked ARC. Plugging into the other port leaves the soundbar connected but silent, because the TV cannot send audio back on a normal HDMI input. Move the cable to the ARC-labeled port, then reselect the sound output.

Which connection should you use first?

Which connection should you use first?
A modern living room with a wall-mounted TV and soundbar

Use HDMI ARC for most setups, and use eARC on newer LG TVs when you want the highest-quality path and lossless audio support. LG’s support pages and manuals describe eARC as the higher-bandwidth option for compatible TVs and soundbars, while optical remains the fallback when HDMI ports are occupied or unavailable. Use Bluetooth for quick wireless pairing, and use WOWCAST only if both devices support it; LG’s compatibility notes state that WOWCAST is only available on select TV and soundbar combinations.

HDMI ARC and eARC

ARC and eARC use the one HDMI port labeled ARC or eARC on the TV. ARC is the fastest, best-sounding default for most setups. eARC is the higher-bandwidth choice for newer LG TVs, and LG documentation notes it can carry higher-quality audio, including lossless formats and Dolby Atmos, when both the TV and soundbar support it.

Optical

Optical is the fallback when HDMI ports are busy. Connect the TV’s optical audio out to the soundbar’s optical input, then switch the TV sound output to optical. LG’s manuals and support notes describe optical as a digital fallback that does not support HDMI-CEC/Simplink control, so you should not expect TV remote volume control or the same Atmos support you get from eARC.

Bluetooth and WOWCAST

Bluetooth is the quick wireless option, but LG’s guidance treats it as a convenience path rather than the preferred home-theater connection. It can add delay and is typically limited to compressed wireless playback. WOWCAST is LG’s wireless route for lossless audio, but only select LG TVs and soundbars support it. If you want TV remote control and clean audio, HDMI ARC/eARC still wins for most homes.

Soundbar connection matrix

This matrix helps you match the setup to the right cable, menu path, and failure point. Use it when the soundbar powers on but the TV still plays through its own speakers, or when the connection works only partly.

Setup type Required ports TV setting names One-remote control works? Common no-sound symptom Fastest verification step
ARC TV HDMI ARC; soundbar HDMI Out (ARC) Sound Out; Simplink Yes, with Simplink on TV speakers stay active after cable swap Confirm TV Sound Out is set to HDMI ARC and toggle Simplink off, then on
eARC TV HDMI eARC; soundbar HDMI Out (ARC) Sound Out; Simplink; eARC support, if shown Yes, with Simplink on Audio plays, but Atmos-capable source sounds plain Check the TV port label and reselect the eARC output
Optical TV Optical Audio Out; soundbar Optical In Sound Out; Digital Sound Output No Soundbar stays quiet after cable insertion Confirm the square optical plug is fully seated and the TV output is Optical
Bluetooth Bluetooth on both devices Bluetooth Audio; Pairing No Audio lags during speech or game play Open the TV Bluetooth list and confirm the soundbar appears as connected
WOWCAST Supported LG TV and supported LG soundbar Sound Out; wireless speaker connection, if offered Yes, on supported models Wireless audio never appears as an output option Check that both models support WOWCAST before changing menus

Setup scenario solver

Setup scenario solver
A living room with a soundbar, subwoofer, and wall-mounted TV

If you want the quickest correct path, use the scenario below instead of guessing from the model name alone. LG’s own documentation is the best reference for the exact port labels and supported features on a given TV and soundbar.

Setup scenario / model class Exact TV port label Exact soundbar port label Required TV setting Soundbar input name Failure symptom Fastest fix
Most LG TVs with one ARC port and a matching LG soundbar HDMI ARC HDMI Out (ARC) Settings > Sound > Sound Out; Simplink on ARC TV speakers stay on Move the cable to the ARC-labeled port and reselect Sound Out
Newer LG TVs and soundbars that both support eARC HDMI eARC HDMI Out (ARC) Settings > Sound > Sound Out; Simplink on; eARC enabled if shown ARC/eARC Atmos is missing or audio sounds compressed Use the eARC port, then confirm the TV is not forcing an optical or Bluetooth output
TV with HDMI ARC available, soundbar connected through a switch or receiver in between HDMI ARC HDMI Out (ARC) on the soundbar chain Settings > Sound > Sound Out; Simplink on TV ARC pass-through Remote volume works inconsistently Remove the extra device temporarily and test the direct TV-to-soundbar link
TV without usable HDMI ARC or with a busy HDMI setup Optical Audio Out Optical In Settings > Sound > Sound Out; Digital Sound Output on Optical/PCM as needed Optical Soundbar powers on but no sound comes through Reseat the optical cable and confirm the TV output is optical, not internal speakers
Quick wireless playback for a phone or TV with a supported pairing menu Bluetooth Audio output Bluetooth pairing mode Bluetooth Audio or Sound Out > Bluetooth, if shown Bluetooth Audio delay or dropouts Use HDMI ARC/eARC for video content and reserve Bluetooth for casual listening
Supported LG TV plus supported LG soundbar with wireless lossless support WOWCAST-capable output WOWCAST-capable input Sound Out > wireless speaker connection, if shown WOWCAST Wireless output option never appears Confirm the exact model compatibility first; if unsupported, use ARC/eARC instead

How do you connect an LG soundbar to an LG TV?

Use HDMI ARC or eARC first when the TV and soundbar ports match. Then enable Simplink, set the TV sound output to the HDMI audio return path, and test volume control from the TV remote. If the TV still uses its own speakers, the issue is usually the port choice or the TV output setting. LG’s setup guides also warn that the wording for these menus can change by model, webOS version, or region.

  1. Match the TV port label to the soundbar port label.
  2. Connect HDMI ARC to HDMI Out (ARC), or use optical only if HDMI is not available.
  3. Open Settings > General > Devices > HDMI Settings and turn on Simplink.
  4. Open Settings > Sound > Sound Out and select the soundbar path.
  5. Set the soundbar input to ARC, Optical, or the correct wireless mode.
  6. Play TV audio and raise volume from the LG TV remote.

Suppose an LG OLED TV shows HDMI eARC and the soundbar supports it, but the TV still outputs sound through its internal speakers. The usual fix is to revisit Sound Out after enabling Simplink, then power-cycle both devices once so the handshake refreshes. LG’s support materials also note that if the device list or label differs, the TV may be using a different regional webOS menu name for the same setting.

How do you pair the subwoofer and app?

The wireless subwoofer usually pairs by itself. When it works, the indicator light stops blinking and stays solid. If pairing fails, use the Pairing or ID Set button, then place the subwoofer where the bass response is even. For Wi‑Fi models, the LG ThinQ app can handle setup and updates, but LG notes that app-based setup appears only on supported soundbars and supported network features.

Wireless subwoofer

  1. Power on the soundbar and subwoofer.
  2. Wait for the subwoofer light to stop blinking and stay solid.
  3. If it keeps blinking, press the Pairing or ID Set button on the subwoofer or soundbar.
  4. Place the subwoofer near a wall, then move it a little at a time until the bass sounds even.

LG ThinQ app

  1. Connect the phone and soundbar to the same Wi‑Fi network.
  2. Open the LG ThinQ app and add the soundbar when it appears.
  3. Use the app for firmware updates, input control, and supported smart features.
  4. Finish any voice assistant setup only after the soundbar is online.

A common first-timer mistake is placing the subwoofer in a corner, then judging the pairing by bass alone. If the indicator is solid but the low end sounds boomy, move it 30 cm at a time and recheck. The pairing may be correct even when the placement is poor.

Troubleshooting by symptom

Troubleshooting by symptom
A living room with a wall-mounted TV and a soundbar setup

No sound

If there is no sound at all, check the TV’s output selection first. LG’s support guidance points to the port label, then the Sound Out setting, then the cable itself. Reseat the HDMI or optical cable, confirm the soundbar is on the correct input, and make sure the TV is not still set to its internal speakers.

TV speakers still active

This usually means the TV did not hand audio over to the external system. Turn on Simplink, revisit Settings > Sound > Sound Out or the equivalent sound output menu for your webOS version, and then power-cycle the TV and soundbar. If the TV is using a different regional menu label, select the option that routes sound to the external device rather than internal speakers.

No remote control

If the TV remote changes only the TV volume, ARC control is not established. That usually points to a missing Simplink/HDMI-CEC setting, the wrong HDMI port, or an optical/Bluetooth connection, which do not provide the same one-remote behavior. Use HDMI ARC/eARC, enable Simplink, and confirm both devices support control over the HDMI link.

Atmos missing

Atmos is most likely to disappear when the system falls back to optical, Bluetooth, or a non-eARC HDMI path. LG’s documentation ties higher-bandwidth Atmos support to compatible eARC hardware and compatible source settings. Check the TV port label, confirm the source device is sending Atmos, and verify the soundbar input is the HDMI ARC/eARC path rather than optical.

Bluetooth lag

Bluetooth can introduce audio delay even when the pairing is successful. If the delay is obvious in dialogue or games, move to HDMI ARC/eARC instead. If you must stay on Bluetooth, re-pair the soundbar and keep the TV and soundbar close, but understand that Bluetooth is still the least precise option for lip-sync.

Subwoofer blinking

A blinking subwoofer light usually means the wireless link has not settled. Press the Pairing or ID Set button, keep the subwoofer near the soundbar during the initial handshake, and wait for the light to go solid. If it keeps blinking, unplug both units briefly and try again after restarting the soundbar first.

Wi‑Fi setup not appearing

If the Wi‑Fi setup option never appears, the model may not support LG ThinQ setup or the soundbar may not be on the same network as the phone. LG’s support pages indicate that only selected soundbars expose Wi‑Fi setup, so the absence of the option can be normal. If the model is supported, reconnect both devices to the same Wi‑Fi network and retry the app.

Common mistakes

  • Using the wrong HDMI port on the TV or soundbar
  • Leaving Simplink or HDMI-CEC off during ARC/eARC setup
  • Leaving the TV sound output on Internal Speaker after the cable is connected
  • Selecting the wrong soundbar input after switching from HDMI to optical
  • Expecting TV remote control or Atmos through optical
  • Assuming Bluetooth will match wired timing for movies or games

If that did not work, move one level down the ladder. Swap the HDMI cable for the ARC/eARC path, then test optical, then Bluetooth only if the TV and soundbar both support it. For wireless LG systems, confirm the exact model supports WOWCAST before chasing menu settings.

Wi‑Fi setup only applies to supported soundbars, and it usually goes through the LG ThinQ app. Put the phone and soundbar on the same network, add the device in the app, and finish the update or input setup before testing audio. Unsupported models will not offer this route. LG’s documentation also notes that app features, labels, and availability can vary by model and region.

Keep reading

Frequently asked questions

How to pair LG sound bar

Put the soundbar into the correct input mode first, then match it to the source. For Bluetooth, open the TV or phone Bluetooth list and select the soundbar name. For ARC or optical, the pair step is really a port match plus the TV sound output setting.