Most Logitech mice do not have a true reset button; if one is present, it is often a tiny pinhole or switch on the underside, and many fixes start with removing the battery, turning the mouse off, or pairing it again. Use the wrong fix and you can waste time on a dead pointer, repeated disconnects, or a receiver problem that looks like a battery fault. This guide shows how to check your model, what to do for Bluetooth, Unifying, and Bolt mice, and when the problem is likely software, battery, or hardware.

What a Logitech mouse reset means

What a Logitech mouse reset means
A Logitech mouse appears beside a reset guide headline

A reset can mean three different things: a real hardware reset control, a power cycle, or a new pairing step. Most Logitech mice rely on the second or third option, while only some supported models include a recessed physical control that needs a pointed object and a hold of about 5 seconds.

Before you press anything, check the symptom. A mouse that will not move, will not light up, or drops connection after waking often needs a battery or receiver fix first. A mouse that is already paired but behaves badly after software changes is more likely to need driver or app repair.

Likely causes, in order

Start with the most common faults first. Dead or weak batteries come up often. Receiver placement and Bluetooth pairing problems are next. Driver conflicts and Logitech software problems are less common, but they matter on some models.

Say your MX-series mouse works for a minute, then stops after sleep. That usually points to a connection or power issue, not a full hardware reset. Picture a mouse that lights up when you flip it on but never moves the pointer; that often means pairing or receiver trouble.

Quick decision table

Mouse symptom Likely cause Best first fix Physical reset button involved?
Cursor does not move after the mouse wakes up Power issue, weak battery, or dropped wireless link Turn the mouse off and back on, then check the battery No, usually not
Receiver mouse not responding USB dongle connection or port issue Remove the USB receiver and try another USB port Usually no
Bluetooth mouse pairs but does not stay connected Bluetooth Low Energy pairing issue Remove the device in Bluetooth settings and pair it again Usually no
Gaming mouse acts oddly after app or profile changes Logitech G HUB or profile conflict Reopen G HUB, then uninstall and reinstall it if needed Sometimes, on supported models
No light, no pointer, no click response Dead battery or no power Replace or recharge the battery, then use the power switch again No, unless the model specifically includes one

How do you reset a Logitech wireless mouse?

How do you reset a Logitech wireless mouse?
Underside of a wireless mouse with battery compartment and labeled controls

Start with a power cycle, because that is the fastest soft reset on most wireless Logitech mice. If a Logitech model has a true reset control, it is typically used only after the basic power and pairing checks. On Bluetooth models, a reset often means removing the pairing and reconnecting it.

  1. Flip the power switch off.
  2. Wait a few seconds, then turn it back on.
  3. If the mouse uses a USB receiver, unplug the dongle and plug it into a different USB port.
  4. If the mouse uses Bluetooth Low Energy, remove it from Bluetooth settings and pair it again.
  5. If your model has a recessed reset control, press it with a pointed object and hold it for about 5 seconds.

Reset flow for receiver mice

Receiver-based mice depend on the dongle as much as the mouse itself. If the pointer is dead, reseat the receiver before you do anything else. A different USB port is often the quickest proof that the port, not the mouse, is the problem.

  1. Turn the mouse off and back on.
  2. Remove the USB receiver.
  3. Insert it into another USB port directly on the computer.
  4. Check whether the cursor responds.

Reset flow for Bluetooth mice

Bluetooth mice use the computer’s pairing list, so a reset may mean clearing the old pairing and creating a new one. That matters on dual-mode models that can use either Logi Bolt USB receiver or Bluetooth Low Energy.

  1. Open Settings > Bluetooth & devices.
  2. Find the Logitech mouse and choose Remove device.
  3. Turn the mouse off and back on.
  4. Put the mouse into pairing mode again.
  5. Select it from the Bluetooth device list.

Reset flow for gaming mice using G HUB

Logitech G HUB is the app used for supported gaming gear configuration, and it is available for Windows and MacOS downloads. If the mouse acts up after profile changes, G HUB can be part of the fix. If problems continue, uninstalling and reinstalling G HUB is a reasonable next step.

  1. Open G HUB and confirm the mouse appears in the device list.
  2. Check whether a profile or button assignment is causing the issue.
  3. Uninstall Logitech G HUB if the problem persists.
  4. Reinstall it, then reconnect the mouse.

Where is the reset button on a Logitech mouse?

Only some Logitech mice have a physical reset control. On supported models, it is commonly recessed and may look like a small oval-shaped opening or switch on the underside. Many models do not have one at all, so do not keep searching for a part your mouse never had.

If the control is recessed, you may need a pointed object to press it. To hold it for about 5 seconds. That is a model-specific example, not a universal rule for every Logitech mouse.

What it usually looks like

Look under the mouse near the power switch, battery compartment, or pairing area. A tiny pinhole is the most common visual clue. On some models, the control is oval-shaped rather than round.

A common first-time mistake is pressing random openings near the sensor. The sensor is not the reset point.

What do I do when my Logitech mouse stops working?

What do I do when my Logitech mouse stops working?
A hand holds a Logitech computer mouse close to the camera

Check power first. A mouse that lights up poorly, skips clicks, or goes silent after sleep often has a weak battery or a switched-off power state. If power is fine, move to the receiver or Bluetooth path that matches your model.

  1. Turn the mouse off, then back on.
  2. Replace or recharge the battery if the model uses one.
  3. If you use a USB receiver, unplug it and try another port.
  4. If you use Bluetooth Low Energy, remove the pairing and add it again.
  5. If the mouse still fails, test it on another computer.

Why is my Logitech mouse not lighting up?

No light usually points to power, not software. The mouse may be off, the battery may be flat, or the charging cable or receiver path may be wrong. On battery models, a dead cell can make the device look completely inactive.

Check the switch first, then the battery compartment or charging connection. If the mouse still shows no light after that, try another USB port or another computer to rule out a bad port.

Do you need Logitech G HUB?

You need G HUB only for supported Logitech gaming devices and related settings. It is not a universal reset tool for every Logitech mouse. For office and business mice, the more relevant steps are pairing, receiver checks, and Windows troubleshooting.

  1. Open G HUB only if your mouse is a supported gaming model.
  2. Check device settings, assignments, and profile changes.
  3. If problems remain, uninstall G HUB.
  4. Install it again from the Windows or MacOS download for your system.

When G HUB is not relevant

Skip G HUB if your mouse is a basic wireless model that only needs a battery, a dongle, or Bluetooth pairing. In that case, the app will not fix a dead receiver port or a flat battery.

MouseWare is the older utility software name you may still see in Logitech support material for some older mice. It is not the normal troubleshooting path for current gaming devices.

What to try if it still does not work

If the mouse still fails after power, pairing, and receiver checks, move to Windows tools. Use the built-in mouse troubleshooter, then repair the driver from Device Manager. If the mouse works elsewhere, the original computer or port is the more likely problem.

  1. Open Control Panel and run the Windows mouse troubleshooter.
  2. Open Device Manager and expand Mice and other pointing devices.
  3. Right-click the Logitech mouse device and choose Update driver or Uninstall device.
  4. Restart the computer so Windows can reload the driver.
  5. Test the mouse on another computer or with another USB port.

If the mouse uses a Logi Bolt USB receiver and a Bluetooth path, test both connection methods separately. Logitech MX Master 3S for Business supports both Logi Bolt USB receiver and Bluetooth Low Energy, and that kind of dual-mode design can make the bad link easier to isolate. The same model also includes Easy-Switch for up to three computers.

Keep the battery charged, and do not leave the receiver in a loose hub if a direct port is available.

Keep reading

Frequently asked questions

Will resetting fix connection problems or do I need to re-pair it?

A reset may help, but pairing is often the real fix. For Bluetooth Low Energy mice, remove the device and add it again. For receiver-based mice, unplug the dongle and try another port before assuming the mouse itself is faulty.