Mi True Wireless Earbuds Basic 2 Reset Guide and Fixes

For Mi True Wireless Earbuds Basic 2, start by forgetting the earbuds on every paired device; if that fails, clear the pairing record, then do a full reset, then repair the phone-side Bluetooth record if one earbud still will not link. Skipping cleanup can leave the buds tied to the wrong phone, out of sync, or unable to reconnect.

Mi True Wireless Earbuds Basic 2 reset: what the problem usually means

Reset is the right move when the earbuds keep reconnecting to an old device, only one side plays audio, or the pair shows up in Bluetooth but will not finish connecting. For this model, the quickest fix is usually to clear saved Bluetooth records first, then move to a full reset if the earbuds still misbehave.

Model details that matter during reset

When to clear pairing records first

Use pairing-record clearing when the earbuds still appear in Bluetooth history on the phone, tablet, or laptop. That step removes the saved device entry without forcing a deeper re-link procedure. If the earbuds were used with more than one source device, clear them from each one before doing anything else.

When you need a full reset instead

Go to a full reset when one bud will not reconnect, the stereo pair breaks apart after pairing, or the earbuds keep acting like two separate devices. The full reset rebuilds the earbud-to-earbud link, which is the part many users miss when they only remove the phone pairing.

📊 The earbuds use Bluetooth 5.0. Source: Mi True Wireless Earbuds Basic 2.

What are the most likely causes of reset failure?

Reset failure usually means the earbuds still have a saved phone record, never powered fully off before the button hold, or did not re-link to each other fast enough after the reset. Less commonly, the case battery state or charging contact state makes the pair seem connected even when one bud is not ready.

Likely cause 1: the old Bluetooth pairing is still saved on the phone

This is the most common reason the earbuds can be found but cannot connect. The phone keeps trying to restore the old session. Remove the old record on every device that saw the earbuds, then restart Bluetooth before pairing again.

1. Open Settings > Bluetooth.
2. Tap the info icon or gear next to Mi True Wireless Earbuds Basic 2.
3. Select Forget This Device, Remove, or Unpair.
4. Turn Bluetooth off, wait 5 seconds, then turn it back on.
5. Pair again only after the earbuds finish their reset sequence.

Likely cause 2: the earbuds did not fully power off before reset

If the buds were still active in the case, the button hold may not start from the correct state. A common first-timer mistake is pressing too early after placing them in the case. Take both earbuds out, make sure they are off, then start the hold from a clean state.

1. Take both earbuds out of the charging case.
2. Wait until both are powered off.
3. Press and hold each multifunction button separately for about 15 seconds.
4. Release after the red and white indicator flashes alternately for the second time.
5. Return to Bluetooth setup only after that pattern appears.

Likely cause 3: the left and right earbuds did not re-link in time

After reset, the buds must reconnect to each other within 20 seconds. If that window is missed, one earbud may flash slowly in white while the other stays off, or only one side may appear to pair. That is a link problem, not a phone problem, so repeat the reset and bring both buds up together.

1. Finish the reset, then keep both earbuds close together.
2. Power on both earbuds within 20 seconds.
3. Watch for one earbud showing a slow white flash.
4. Check that the other earbud’s indicator turns off.
5. If that does not happen, repeat the full reset from the start.

Likely cause 4: the case or charging contact state is confusing the connection

If an earbud still acts alive in the case, the phone can keep seeing it as available. That can happen when the case battery is low, the bud is not seated fully, or the contacts need cleaning. Say your left bud keeps lighting up inside the case while the right one behaves normally; the first check should be contact and charge, not pairing.

1. Remove both earbuds from the case.
2. Inspect the charging contacts on the buds and in the case.
3. Reseat each earbud until it sits flat.
4. Charge the case, then charge the earbuds.
5. Retry the reset only after both buds are powered off.

How do you clear the pairing record on Mi True Wireless Earbuds Basic 2?

Clear the pairing record by holding both multifunction buttons for about 10 seconds until the red and white indicator flashes alternately 3 times. This removes stored device pairing history from the earbuds, which is useful when the buds keep returning to an old phone or refuse to complete a fresh pairing.

Use the 10-second button hold

Put the earbuds in a ready state first. Then hold both multifunction buttons about 10 seconds. The timing matters because this is a separate action from the full reset, and it is shorter. If you stop early, the pairing history may remain intact.

1. Take both earbuds out of the case.
2. Make sure both are powered on or ready to respond.
3. Press and hold the left and right multifunction buttons at the same time.
4. Keep holding for about 10 seconds.
5. Release when the red and white light flashes alternately 3 times.

What this step removes

This step clears saved device pairing history on the earbuds. It does not rebuild the left-right earbud link by itself. If the pair still splits apart after this step, move to the full reset rather than repeating the same hold over and over.

How do you do a full reset on Mi True Wireless Earbuds Basic 2?

A full reset usually starts with both earbuds removed from the charging case and powered off, then each multifunction button is held separately for around 15 seconds. Release after the red and white indicator flashes alternately for the second time. That is the reset sequence that rebuilds the earbuds from a clean state.

Use the 15-second reset sequence

1. Remove both earbuds from the charging case.
2. Confirm both earbuds are powered off.
3. Press and hold the multifunction button on the left earbud separately.
4. Press and hold the multifunction button on the right earbud separately.
5. Hold both for about 15 seconds.
6. Release after the red and white indicator flashes alternately for the second time.

What the LED sequence means

The alternating red and white flash is the verification point. The second alternating flash tells you the reset has completed. If you release too early, the earbuds may only clear part of the record and still refuse to re-link cleanly.

How do the left and right earbuds reconnect after a reset?

After reset, the left and right earbuds should re-link automatically within 20 seconds. One earbud will show a slow white flash, and the other earbud’s indicator turns off. That pattern is the sign that the pair has formed again before you try phone pairing.

Why the 20-second window matters

The earbuds are designed to rebuild their internal stereo connection quickly. If you wait too long, they may stay in separate states and the phone will only see one side or will see a broken pair. Keep both buds close together and power them on together.

What the indicators should do

Expect one earbud to flash white slowly while the second earbud goes dark. If both keep flashing, or only one bud lights up, the pair is not linked yet. Repeat the reset and check the timing again rather than moving straight to phone pairing.

Decision tree: clear pairing, full reset, or phone-side Bluetooth cleanup?

Use the saved-phone-record cleanup first when the earbuds are found but will not connect. Use a full reset when one earbud stays linked and the other does not, or when the pair keeps breaking apart. If the earbuds still appear on the phone after reset, delete the phone-side Bluetooth record and restart the source device.

Compact decision tree

If the earbuds are searched but cannot connect

That usually points to leftover Bluetooth data on the phone, not a failed earbud reset. Delete the previous connection record, restart the device, then reconnect only after the earbuds have re-linked to each other. Picture a phone that finds “Mi True Wireless Earbuds Basic 2” but never finishes pairing; that is the point to clean the device record first.

1. Open Settings > Bluetooth.
2. Tap Forget or Remove on the earbud entry.
3. Restart the phone or source device.
4. Wait for both earbuds to finish their left-right re-link.
5. Open Bluetooth and pair again.

Why are my earbuds still connected in the case?

If the earbuds still show connected in the case, the phone likely kept a saved Bluetooth record, or one earbud is not fully off because of charge or contact issues. The fastest fix is to clear the phone record, restart the source device, and reconnect only after both earbuds have re-linked outside the case.

Check the saved Bluetooth record on the phone

Open Bluetooth settings and remove the earbuds from the list of paired devices. If they remain on another nearby phone, remove them there as well. That stops the case from looking like a live audio source when it should be idle.

Restart the phone or source device

After deleting the record, restart the phone or tablet before pairing again. This clears a stale Bluetooth session. If the device still sees the buds immediately after restart, repeat the forget step and wait for the earbuds to finish re-linking before reconnecting.

Reconnect only after both earbuds have re-linked

Do not pair as soon as one bud appears. Wait for the slow white flash on one side and the other side to turn off. That tells you the earbuds are back together as a single pair and ready for the phone.

Can Mi True Wireless Earbuds Basic 2 connect to multiple phones at the same time?

No. Mi True Wireless Earbuds Basic 2 does not support multiple phones at the same time. If you want to switch devices, forget the earbuds on the first phone, then pair them with the second one. Apple phones and most Android phones can show battery level, but simultaneous multi-phone use is not supported.

Compatibility limits to keep in mind

• Does not support multiple phones at the same time.
• Supports Apple phones and most Android phones showing battery level.
• Does not support Mi Smart Band or other Bluetooth band connections.
• Uses Bluetooth 5.0 with about 10 meters of range without obstacles.

What PIN code should I enter if pairing fails?

No PIN code should be entered for Mi True Wireless Earbuds Basic 2 pairing. If a phone asks for one, cancel the prompt and remove the old Bluetooth record first. Then restart the source device, let the earbuds finish re-linking, and pair again from Bluetooth settings.

Still not working?

If the earbuds still fail after the reset sequence, remove the Bluetooth record again, confirm they are not paired to another nearby phone, and check whether the case and earbuds have enough charge. If one side never shows the expected indicator behavior, the problem may be charging contact or battery related rather than pairing history.

Escalation ladder

1. Forget the earbuds on every device that saved them.
2. Repeat the 10-second pairing-record clear.
3. Repeat the 15-second full reset with the alternate red/white flash check.
4. Recharge the case and both earbuds.
5. Try pairing with a different phone or tablet.
6. If one bud still never relinks or charges, contact the seller or service channel for support.

Prevention

When switching phones, always remove the earbuds from the old device first. That simple step reduces the chance that the pair will reconnect to the wrong source and avoids another full reset later.

Related: How to Reset Sony Wireless Earbuds: Step-by-Step Guide

Frequently asked questions

How do I reset Mi True Wireless Earbuds Basic 2?

Remove both earbuds from the case, make sure they are powered off, then hold each multifunction button separately for about 15 seconds. Release after the red and white indicator flashes alternately for the second time. After that, wait up to 20 seconds for the left and right earbuds to reconnect before pairing again.

What is the difference between clearing pairing and factory reset?

Clearing pairing removes saved device history with a 10-second hold and a 3-flash red/white pattern. A full reset rebuilds the earbuds with a 15-second hold and ends on the second alternating red/white flash. Use clearing first; use full reset when the two earbuds no longer stay linked together.

How long do I hold the buttons to reset Mi True Wireless Earbuds Basic 2?

Hold each multifunction button separately for about 15 seconds. Do not stop at the first flash. The reset is complete only after the red and white indicator flashes alternately for the second time, which is the signal to release and move on to phone pairing.

Why are my Mi True Wireless Earbuds Basic 2 not connecting after reset?

Most often, the phone still has the old Bluetooth record saved, or the earbuds did not re-link within 20 seconds after reset. Delete the device from Bluetooth settings, restart the phone, then wait for one earbud’s slow white flash and the other earbud’s indicator to turn off before reconnecting.

Does Mi True Wireless Earbuds Basic 2 support multiple phones at the same time?

No. The earbuds do not support multiple phones at the same time. If you move them to another phone, forget the earbuds on the first device first. Apple phones and most Android phones can show battery level, but simultaneous connection to several phones is not available.