Many Microsoft ergonomic keyboards do not pair over Bluetooth. The Microsoft Ergonomic Keyboard is wired USB, while the Sculpt Ergonomic Desktop uses a USB transceiver, and only Bluetooth models pair in Windows settings. Using the wrong setup steps wastes time and can make a working keyboard seem faulty. This guide separates each model and shows the correct connection path for wired, transceiver, and Bluetooth versions. (Microsoft Support)

Identify your Microsoft keyboard first

Identify your Microsoft keyboard first
A person uses a Microsoft ergonomic keyboard and mouse at a desk

Check the model name on the underside, in the box, or on the receiver. The Microsoft Ergonomic Keyboard is the 2019 wired USB model with a split design and cushioned palm rest, and it is not wireless. Sculpt and Surface ergonomic models often use different connection steps, so do not start with Bluetooth unless the keyboard is actually a Bluetooth model.

Windows 10 and Windows 11 both matter here. Office and Emoji keys require Windows 10 or Windows 11 on supported models, and Microsoft Mouse and Keyboard Center is the tool Microsoft recommends for customizing typing settings, key behavior, and special keys.

What you'll need

  • A Windows 10 or Windows 11 PC
  • The keyboard itself, plus batteries if it is battery powered
  • A USB charging cable if your model recharges over USB
  • A free USB port for wired models
  • The included USB receiver if your model uses one
  • Microsoft Mouse and Keyboard Center, if you want to personalize keys later

Microsoft keyboard decision table

Keyboard family / model Connection type Pairing button? Exact first setup step
Microsoft Ergonomic Keyboard (2019) USB wired No Plug the USB cable into any USB port.
Microsoft Sculpt Ergonomic Desktop USB receiver No user pairing step Insert the Microsoft wireless receiver and let Windows install it.
Microsoft Sculpt Comfort Keyboard Bluetooth or wireless, model-dependent Usually yes on Bluetooth versions Check the label and follow the model’s Bluetooth setup path.
Microsoft Surface Ergonomic Keyboard Bluetooth Yes Open Windows Bluetooth settings and start Add device.

How do you connect a Bluetooth Microsoft ergonomic keyboard?

How do you connect a Bluetooth Microsoft ergonomic keyboard?
A black ergonomic keyboard is shown on a white background

Use Windows Bluetooth settings, not the USB-only path. Turn the keyboard on, confirm it has power, and hold the pairing button for 5-7 seconds until the light blinks. Then pair it from Windows Bluetooth settings. If it was already connected to another PC, remove that old pairing first or the new PC may not find it.

Step-by-step Bluetooth setup

  1. Turn on the keyboard and confirm battery or charge status.
  2. Press and hold the pairing button for 5-7 seconds.
  3. Open Settings > Bluetooth & devices.
  4. Select Add device or Add Bluetooth or other device.
  5. Choose the keyboard name when it appears, then finish pairing.

Say your Surface Ergonomic Keyboard blinks, but Windows never lists it. Open Bluetooth & devices on the PC it used before and remove the keyboard there, then repeat the 5-7 second pairing press on the new PC.

If that didn't work, try this next

  1. On Windows, go to Settings > Bluetooth & devices and turn Bluetooth off, then on again.
  2. Delete the keyboard from Bluetooth & devices > Devices if it appears with a stale connection.
  3. Press and hold the pairing button again for 5-7 seconds and repeat Add device.

How do you connect a USB-only Microsoft ergonomic keyboard?

Plug the USB cable into any USB port and let Windows install it. The wired Microsoft Ergonomic Keyboard does not use Bluetooth, does not need a pairing button, and should work once Windows finishes setup. Windows may show a notification, but it can also complete the install quietly.

Wired setup path

  1. Plug the keyboard’s USB cable into a USB port on the PC.
  2. Wait a few seconds for Windows to detect it.
  3. Start typing in Notepad or any text box to confirm input.
  4. Skip Settings > Bluetooth & devices; it is not needed for this model.

A common first-timer mistake is opening Bluetooth settings for the 2019 Microsoft Ergonomic Keyboard because the name sounds wireless. It is not wireless. If the cable is seated and the port works, the keyboard should be ready without any pairing step.

Where is the pairing button on a Microsoft ergonomic keyboard?

On Bluetooth-capable Microsoft ergonomic keyboards, the pairing button is usually on the bottom or rear edge, but the exact location varies by model. Hold it for 5-7 seconds until the indicator light blinks. On the wired Microsoft Ergonomic Keyboard, there is no pairing button because it does not pair at all.

What the light should do

A blinking light usually means the keyboard is discoverable. If the light flashes three times and stops, Microsoft says the device is already paired to another PC on supported Bluetooth models. That is not a universal rule for every Microsoft ergonomic keyboard, so use the model name first, then troubleshoot.

Why does my Microsoft keyboard flash three times then stop?

Why does my Microsoft keyboard flash three times then stop?
A Microsoft ergonomic keyboard is shown in close-up on a white background

On supported Bluetooth models, that pattern usually means the keyboard is already paired elsewhere. Check battery or charge level first, then remove the keyboard from the old PC’s Bluetooth list, and try again. On USB-only models, a flash pattern is more likely a power or model mismatch issue than a pairing problem.

Failure branch

  1. Replace batteries or recharge the keyboard if the low-power light is on or blinking red.
  2. On the old PC, open Settings > Bluetooth & devices and remove the keyboard.
  3. On the new PC, go to Settings > Bluetooth & devices > Add device and pair again.

Suppose a Sculpt-style keyboard is blinking red after a long period of inactivity. Replace the batteries or recharge it first; a dead battery can look like a pairing failure, and Windows cannot complete setup until the keyboard has enough power.

What Windows settings do you use to add a Microsoft keyboard?

Use Settings > Bluetooth & devices on Windows 11, or the matching Bluetooth settings page on Windows 10. Then choose Add device or Add Bluetooth or other device. That path is for Bluetooth keyboards only. Wired Microsoft Ergonomic Keyboard models skip it and install through the USB port instead.

If the keyboard is already listed, remove it and add it again. That clears a stale Bluetooth record. For receiver-based Microsoft ergonomic models, plug in the receiver and let Windows handle the rest.

Common mistakes

  • Using Bluetooth steps for the wired Microsoft Ergonomic Keyboard
  • Looking for a pairing button on a model that uses USB only
  • Following old Windows paths instead of Bluetooth & devices
  • Trying to pair a keyboard that is already connected to another PC
  • Ignoring battery or charge warnings on Bluetooth models

Microsoft Mouse and Keyboard Center is useful after setup, not before it. Use it to customize typing settings, personalize keys, and adjust behavior once the keyboard is connected and working.

Keep reading

Frequently asked questions

How do I connect a Microsoft ergonomic Bluetooth keyboard?

Turn it on, hold the pairing button for 5-7 seconds, then open Settings > Bluetooth & devices > Add device on Windows 10 or 11. Pick the keyboard from the list and finish the prompt. If it was paired elsewhere, remove it from the old PC first.

How do I connect a Microsoft ergonomic keyboard?

If it is the wired Microsoft Ergonomic Keyboard, plug the USB cable into any USB port and wait for Windows to install it. If it is a Bluetooth model, use Bluetooth & devices and Add device. The model name decides the setup path.

Do I need Bluetooth or a USB cable for Microsoft ergonomic keyboard setup?

The Microsoft Ergonomic Keyboard needs a USB cable. Bluetooth-capable Microsoft ergonomic models need Bluetooth in Windows 10 or 11 and the pairing button held for 5-7 seconds. If your keyboard came with a receiver, use that receiver instead of Windows Bluetooth settings.

Do Microsoft ergonomic keyboards need batteries to pair?

Only battery-powered Bluetooth or wireless models need batteries before pairing. The wired Microsoft Ergonomic Keyboard does not. If a Bluetooth model has a blinking red light or will not enter pairing mode, check or replace the batteries, or recharge it if the model supports USB charging.