It typically clears the phone’s saved Wi‑Fi networks, Bluetooth pairings, and mobile network preferences, while leaving photos, apps, and personal files on the device. If the problem affects more than one radio, or started after a SIM or carrier change, this is usually the fastest targeted fix to try first.

What a Motorola network reset changes

What gets cleared

  • Saved Wi‑Fi networks and their passwords.
  • Paired Bluetooth devices, including speakers, earbuds, and car infotainment entries.
  • Mobile network settings, including APN-related preferences and carrier profile data tied to connectivity.

What stays on the phone

  • Photos and videos.
  • Apps and app data.
  • Personal files and accounts.

Motorola’s help content is grouped under software and support, with dedicated product help, a repair-related support path, software updates, software fix options, and Moto Care support. Motorola also sells Android smartphones across several families, including Moto G models. Menu labels can vary across those models and Android versions, so the path may look slightly different.

Is network reset the right fix?

Is network reset the right fix?
A phone settings screen highlights the Network & internet menu

Use it when the failure pattern points to stored radio settings, a bad profile, or stale pairing data rather than a single broken app or a dead router. If one radio fails after a settings change, or all three fail after a SIM swap, a network reset is often the better fit than a broad factory wipe.

Wi‑Fi only problems and router checks

If only Wi‑Fi fails, the phone may be holding a bad saved network entry, the wrong band preference, or a temporary radio glitch. If every device in the house is down, the router is the more likely problem, not the Motorola phone.

Say your phone joins the 2.4 GHz band but refuses the 5 GHz band after a password change. A network reset can clear the stale profile, but a router reboot or band setting check may still be the real fix.

Bluetooth only problems and pairing checks

If Bluetooth speakers, earbuds, or car infotainment systems will not reconnect, the stored pairing entry may be corrupted. A network reset removes those pairings, which is useful when the accessory shows up but fails at the handshake stage.

A common first-timer mistake is retrying the same paired entry over and over. If the accessory never reaches the connected state, delete the old device entry and pair again after the reset.

Mobile data only problems and APN or carrier checks

If Wi‑Fi works but mobile data does not, the issue often lies with the SIM, the APN, or carrier provisioning. A network reset can restore the APN list, but it cannot fix an outage, an inactive line, or a provisioning problem on the carrier side.

All radios failing and airplane mode or system glitch checks

If Wi‑Fi, Bluetooth, and mobile data all fail together, start with airplane mode and a restart before you spend time on deeper steps. That pattern can come from a temporary radio lockup, a bad profile pull after a carrier change, or a system-level connectivity glitch.

Likely causes, from most common to less common:

  • Stale saved wireless settings after a password, router, or accessory change.
  • Temporary radio glitch after sleep, travel, or a failed reconnect.
  • APN or carrier profile mismatch after a SIM or eSIM change.
  • Router, accessory, or carrier-side fault outside the phone.

How do I reset network settings on a Motorola phone?

On most Motorola phones, the reset lives inside Settings under system or network options, then reset options. Motorola changes labels by Android version and model, so you may see slightly different wording. The reset itself is usually quick and safe, but Wi‑Fi and Bluetooth will need to be set up again afterward.

  1. Open Settings.
  2. Go to System or Network & internet.
  3. Tap Reset options or a similar reset menu.
  4. Select Reset Wi‑Fi, mobile & Bluetooth or the closest Motorola label.
  5. Review the warning, then confirm the reset.
  6. Restart the phone once the reset completes.

Follow the reset prompt and confirm

The confirmation screen should mention Wi‑Fi, Bluetooth, and mobile network preferences. It should not mention a full data wipe. If it looks like a factory reset, stop and back out.

Restart the phone after the reset

A restart helps the radio stack rebuild cleanly. If the phone still shows the same connection failure after reboot, move straight to the symptom-specific checks below.

What to do after a Wi‑Fi reset

After the reset, rejoin the network by choosing it from the saved list and entering the password again. If the phone still refuses to connect, the router band, airplane mode, or saved router settings may be the issue rather than the Motorola phone.

Reconnect to saved networks and re-enter passwords

  1. Open Settings > Network & internet > Internet or the closest Wi‑Fi page.
  2. Turn Wi‑Fi on.
  3. Select the network name again.
  4. Enter the password manually.
  5. Test the connection by opening a webpage or checking another app with live data.

Check 2.4 GHz and 5 GHz router compatibility

  1. In the router app or router admin page, confirm whether the network uses 2.4 GHz, 5 GHz, or both.
  2. Try the other band if the phone fails on one band only.
  3. Rename the bands separately if the router uses one shared name and the phone keeps choosing the wrong one.

Turn airplane mode off if Wi‑Fi still will not connect

  1. Swipe down for Quick Settings.
  2. Confirm Airplane mode is off.
  3. Toggle Wi‑Fi off, then back on.
  4. Restart the router if every device on the same network is failing.

How do I fix Bluetooth pairing problems on my Motorola phone?

Bluetooth problems after a network reset usually come from old pairings, accessory memory, or a failed re-pair step. The reset removes the saved Bluetooth list, so the accessory must be paired again from scratch, including earbuds, speakers, and many car systems.

Remove old pairings and pair the accessory again

  1. Open Settings > Connected devices or Bluetooth.
  2. Find the accessory in the paired list.
  3. Tap the device name and choose Forget or Unpair.
  4. Put the speaker, earbuds, or car system back into pairing mode.
  5. Pair it again from the phone’s Bluetooth menu.

Reconnect speakers, earbuds, and car infotainment systems

Many accessories keep only one active phone profile at a time. If a car infotainment unit still refuses to connect, clear its stored phone list too, then pair the Motorola phone as a new device.

  1. Go to Settings > Apps.
  2. Show system apps if that option is available.
  3. Open Bluetooth or Bluetooth Share if listed.
  4. Clear cache if the option appears, then retry pairing.

How do I restore mobile data after a network reset?

How do I restore mobile data after a network reset?
A smartphone and SIM card tray rest on a wooden surface

Mobile data usually returns after the phone re-reads the SIM and carrier profile, but APN settings may need to be restored or reselected. If the network reset did not fix data access, the next check is the carrier side: SIM status, provisioning, and service availability.

Confirm SIM status after the reset

  1. Open Settings > Network & internet > SIMs or the SIM menu on your model.
  2. Confirm the SIM is detected and turned on.
  3. If it is a physical SIM, power the phone off and reseat it.
  4. If it is an eSIM, confirm the line is active in the carrier app or account portal.

Let APN settings auto-restore or reselect the carrier APN

  1. Go to Settings > Network & internet > SIMs > Access Point Names or the closest APN menu.
  2. Choose Reset to default if the option appears.
  3. Select the carrier APN from the list if it does not restore automatically.
  4. Toggle mobile data off and back on.

Check carrier provisioning for 4G and 5G service

If the phone shows signal bars but no data, the line may need a carrier profile refresh. That matters after a SIM swap, plan change, or eSIM transfer. A reset cannot add missing 4G or 5G provisioning to an account that the carrier has not activated.

Network reset decision table

This table links the symptom to the next best step. If the reset fits the symptom pattern, use it. If the likely cause sits outside the phone, move to router, SIM, APN, or carrier checks instead of repeating the same reset.

Symptom Likely cause Does network reset help? Next best check
Wi‑Fi only Saved network entry, password mismatch, band mismatch Yes, often Router band check, Wi‑Fi password re-entry, airplane mode off
Bluetooth only Corrupted pairing record or accessory memory Yes, often Forget the device and pair again; clear accessory memory if needed
Mobile data only APN, SIM, or carrier provisioning issue Sometimes APN reset to default, SIM reseat, carrier account check
All radios failing Temporary radio glitch or system-level connectivity fault Yes, often Airplane mode toggle, restart, then network reset
Post-reset failure Router fault, carrier outage, broken APN, or inactive line No, not by itself Verify router, SIM, eSIM, APN, and carrier service status

Still not working?

Still not working?
A smartphone lies beside a removed SIM card tray on a wooden surface

If the reset did not fix the problem, move one level deeper instead of repeating it. The next step is usually a SIM reseat or carrier profile refresh, then a carrier outage check, and only after that a factory reset. A factory reset is usually the last resort because it erases the phone’s data and calls for a full backup first.

Reseat the SIM or refresh the eSIM profile

  1. Power the phone off.
  2. Remove and reinstall the physical SIM, or remove and re-add the eSIM line if your carrier app supports it.
  3. Power the phone back on.
  4. Test mobile data and call service again.

Check for a carrier outage or account issue

  1. Check the carrier status page or account app.
  2. Confirm the line is active and the data plan is not suspended.
  3. Ask the carrier to refresh the profile if the phone still shows signal without data.

Move to a factory reset only after backup

  1. Back up photos, files, messages, and app data first.
  2. Use Settings > System > Reset options or the closest factory reset path.
  3. Choose the factory reset option only after the network reset, SIM, APN, and carrier checks fail.

Prevention: after a SIM change, carrier switch, or router update, reconnect Wi‑Fi and Bluetooth once before assuming the phone is broken. That simple step often catches a stale password or pairing record before it turns into a larger support issue.

Keep reading

Frequently asked questions

Will resetting network settings delete my photos or apps?

No. It removes saved Wi‑Fi profiles, Bluetooth pairings, and mobile network preferences, but it does not factory reset the phone. Photos, apps, and personal files stay on the device. You will need to re-enter Wi‑Fi passwords and pair Bluetooth accessories again.

Why is my Motorola phone not connecting to Wi‑Fi after a reset?

Check the password first, then confirm the router’s 2.4 GHz or 5 GHz band is compatible with the phone. Also make sure airplane mode is off. If every device on the same network fails, reboot the router and test again from a short distance away.

What gets erased when I reset network settings on Motorola?

The reset erases saved Wi‑Fi networks, Bluetooth pairings, and mobile network preferences, including APN-related settings. It does not erase photos, apps, or personal files. Afterward, the phone may need to re-learn your carrier settings and reconnect accessories.

Should I reset network settings before factory resetting my Motorola phone?

Yes. If the problem is only Wi‑Fi, Bluetooth, or mobile data, the network reset is the lower-risk step. A factory reset is for broader phone problems and requires a backup first because it removes personal data from the device.