For Pixel 7, Pixel 7 Pro, and Pixel 7a, Google’s setup path starts in Settings > Network & internet > SIMs, then Download a SIM instead. From there, you may use QR code, carrier app/push, or manual SM-DP+ entry depending on the carrier’s activation flow. If setup stalls, [carrier unlock checks](/carrier-unlock-check/), [dual-SIM settings](/dual-sim-settings/), and [travel eSIM troubleshooting](/travel-esim-troubleshooting/) are the fastest related fixes.
What should you check before you start?
- A Pixel 7, Pixel 7 Pro, or Pixel 7a with eSIM support available on the specific carrier and region.
- Your carrier’s eSIM QR code, or the SM-DP+ address and activation code for manual entry.
- Your EID if the carrier asks for device verification during provisioning.
- A stable Wi‑Fi connection for profile download and activation.
- Your carrier account login if activation happens through an app or push notification.
- An unlocked phone if you plan to use a travel eSIM or another carrier’s profile.
How do you confirm carrier support first?
Google Pixel Help says the setup path can differ by carrier, region, and Android build, so support has to be confirmed before you begin. Pixel 7, Pixel 7 Pro, and Pixel 7a can use eSIM, but the provider still has to allow the line on that device. Check the carrier’s own activation page or support app.
How do you confirm the phone is unlocked?
Unlock status matters before you try a second carrier or travel eSIM. A locked Pixel can block some activation paths or limit the plans shown during setup. If the line does not provision, verify the phone’s unlock state first; that is often the difference between a failed install and a supported one.
Where do you find the EID before setup?
The EID is usually listed in Settings > About phone, and some carriers request it before they release the profile. Google Pixel Help and Google Fi Help both use the EID as a device identifier in activation flows. Copy it exactly, because one wrong digit can delay provisioning or trigger a support reset.
Do you need Wi‑Fi to download the profile?
Wi‑Fi is the safest setup path, but it is not a universal requirement in every carrier flow. Google’s help docs recommend a stable connection because the phone needs to fetch the eSIM profile before service starts. If your network is captive or unstable, the download can stop before activation completes.
Where can you find related setup help?
If you are still deciding between methods, see [Google Fi eSIM setup](/google-fi-esim-setup/) for carrier-managed activation and [Pixel compatibility](/pixel-compatibility/) for device and region support basics. Those guides help separate phone capability from carrier policy, which is the most common source of confusion.
Which setup method should you use?
| Setup method | Prerequisites | Best use case | Likely failure points | Exact fallback action |
|---|---|---|---|---|
| QR code scan | Carrier QR, camera access, Wi‑Fi, supported Pixel 7 / 7 Pro / 7a carrier flow | Most carrier and travel eSIM activations | QR shown on the same phone, glare, damaged printout, expired code, or carrier page that says the code is invalid | Use Manual entry, or ask the carrier for a new QR and the SM-DP+ details |
| Carrier push notification | Carrier account set up on the device, Wi‑Fi, supported provider flow, device authorized with the correct EID/IMEI | Post-purchase carrier activation on supported carriers | No notification, stale account session, carrier profile not linked to the EID, or a prompt that never appears in the carrier app | Open the carrier app, sign in again, or ask support to resend the eSIM activation |
| Manual SM-DP+ entry | SM-DP+ address, activation code, Wi‑Fi, and the carrier’s manual-entry option | When the QR is unavailable, unreadable, or displayed on the same phone | Typing errors, missing code, carrier portal mismatch, or a setup screen that rejects the address format | Re-enter the address exactly, then verify the activation code and EID with the carrier |
Google Pixel Help and Google Fi Help both support this same basic decision tree: QR when the carrier gives you a scannable code, carrier push when the provider controls the provisioning, and manual SM-DP+ when the code cannot be scanned. Exact labels and prompts can vary, so the carrier’s instructions always override the generic phone menu path.
When is QR code setup the best option?
Use QR when the carrier provides a readable code and the code is on a different screen or printed page. On Pixel 7, Pixel 7 Pro, and Pixel 7a, the route is still Settings > Network & internet > SIMs > Download a SIM instead. If the scan fails, the carrier’s support page usually recommends manual entry next.
When should you use carrier push activation?
Carrier push works when the provider triggers provisioning after sign-in or order approval. The exact prompt depends on the carrier and may appear in the app or as a notification. If nothing arrives, sign out and back in, then check that the carrier has the correct EID and line record attached to the account.
When should you use manual SM-DP+ entry?
Manual entry is the clean fallback when the QR cannot be scanned or the carrier only provides text details. Enter the SM-DP+ address exactly as shown, then add the activation code. If the setup screen rejects the values, the most likely causes are a typo, an expired code, or a carrier-side provisioning mismatch.
How do you set up eSIM on Pixel 7?
- Open Settings > Network & internet > SIMs.
- Tap Download a SIM instead.
- Choose Scan QR code if the carrier gave you one, or choose manual entry if you have SM-DP+ details.
- Keep the phone on Wi‑Fi while the profile downloads.
- Follow the carrier prompt until the line appears in SIM settings.
- Label the line after activation so calls, texts, and mobile data are easier to sort later.
Google Pixel Help uses this same menu path for Pixel 7 series setup, and the wording may shift slightly with Android version updates. If the carrier sends a QR code by email but it is open on the same phone, switch to manual entry or use another screen. That avoids the scan loop and usually finishes faster.
What exact menu labels should you expect?
The most common labels are Settings > Network & internet > SIMs and Download a SIM instead. Some Android builds may show a slightly different placement for the action button, but the route stays the same. If you cannot find it, use Settings search for SIMs and follow the result into the same activation screen.
What should you do if setup is stuck on a carrier prompt?
If the phone stops on a carrier prompt, leave the screen open, confirm Wi‑Fi, and wait a moment before retrying. Carrier apps sometimes need a fresh sign-in or a second approval step. If the prompt keeps failing, verify that the carrier already attached the line to the correct EID or account record.
How do you add an eSIM without a QR code?
You can add an eSIM without a QR code if the carrier supports push activation or manual SM-DP+ entry. That is the standard fallback in Google Pixel Help, Google Fi Help, and many carrier guides. If the carrier asks for device verification, provide the EID from Settings > About phone.
How does manual SM-DP+ fallback work?
Manual fallback uses two fields: the SM-DP+ address and the activation code. Enter both exactly as provided, then continue the setup flow. If the carrier’s support page lists a manual option, use it when the QR is unreadable, hidden on the same device, or blocked by a browser or email app.
What are the failure signals for manual entry?
The most common failure signals are an invalid code message, a setup loop that returns to SIMs, or a line that appears but never activates. Those usually mean a typo, an expired profile, or a mismatch between the carrier record and the device identity. Recheck the code and ask the carrier to confirm the assignment.
How do you handle carrier verification requests?
If the carrier asks for verification, give the EID exactly as shown in About phone and confirm that the line is intended for this Pixel. Google Fi Help and other major carrier docs often use EID or IMEI checks before pushing a profile. If the portal rejects the device, support may need to refresh the order.
Does Pixel 7 need Wi‑Fi for activation?
Wi‑Fi is the most reliable activation path because the phone needs a stable data connection to download the carrier profile. That said, the requirement can vary by carrier and by whether the line is already active. If the connection is weak, captive, or drops during setup, the install can stall before service starts.
How do you fix weak or captive Wi‑Fi first?
Move to a stronger access point, then return to Settings > Network & internet > SIMs and try Download a SIM instead again. If a hotel or public network shows a sign-in page, finish that login first. Captive portals often pause background downloads until the portal is accepted.
Can mobile data finish the first install?
Sometimes, but it is not the safest assumption. If no SIM is active yet, the phone may not have a reliable second connection to complete provisioning. Google help docs generally steer users toward Wi‑Fi for the first install, then let the carrier finish activation once the profile is on the device.
When should you retry on a different network?
If the profile downloads halfway and then stops, switch to a different trusted network and repeat the same menu path. A failed download does not always mean the code is bad; it can also point to an unstable network. If the carrier still shows the line as pending, ask support to resend it.
Can Pixel 7 use two eSIMs at once?
Pixel 7 series can support dual eSIM behavior, but availability depends on carrier, region, Android build, and whether one line is eSIM or physical SIM. Google’s guidance is more precise than a blanket “always yes.” In practice, some setups allow two active lines, while others are limited by the carrier’s policy.
How do you choose the default line for calls and texts?
After activation, open Settings > Network & internet > SIMs and assign the default for calls and SMS. Labeling each line helps when you have a travel eSIM and a primary number at the same time. If the wrong line is used, confirm both profiles are enabled before changing the default.
How do you set mobile data on the right line?
In SIM settings, pick the eSIM or nano-SIM that should carry mobile data. This matters when one line is for travel and the other is for your main number. If data does not move, check whether the chosen line is enabled and whether the carrier permits data on that profile.
What should you know about dual-SIM behavior?
Android and carrier support can change which combinations are available. Some setups allow two active eSIMs, while others support one eSIM plus one physical SIM more consistently. If your carrier, region, or Android version limits the pairing, the phone may still show both profiles but only one line may be active for data.
How does Pixel 7 compare with Pixel 6?
Pixel 7 series uses the same general SIMs menu path, but its eSIM behavior can be broader depending on the carrier and Android build. That is why older Pixel guidance should not be copied verbatim. For the exact device rule, check the carrier’s Pixel compatibility page before assuming the same pairing or activation path will work.
What changed in the setup experience?
The setup steps still start in Settings > Network & internet > SIMs, but the carrier may expose different prompts or limit certain combinations. The same source notes that carrier policy can change which methods appear. So the interface may look similar across Pixel 6 and Pixel 7, while the available actions are not identical.
Why does carrier policy matter more than model name alone?
Because eSIM provisioning is a device-and-account decision, not just a phone feature. The carrier must approve the IMEI or EID, and region rules can also change what shows up. If a Pixel 7 works on one carrier but not another, that is often a policy difference rather than a hardware problem.
When should you check compatibility before upgrading?
Check compatibility before moving service, especially if you use a work line, travel plan, or dual-SIM setup. A carrier can support the Pixel 7 hardware but still restrict a particular plan or region. If the account is not eligible, the SIMs menu may still open, but activation will not finish.
What are the most common setup mistakes?
Why won’t the QR code scan?
The code may be damaged, expired, too dim, or displayed on the same phone. Try a brighter display, a cleaner camera view, or manual SM-DP+ entry from Settings > Network & internet > SIMs. If the carrier issued the code, ask for a fresh one and verify the line is assigned to the right device.
Why does the carrier never send the push setup?
Open the carrier app, sign out, then sign back in and look for the eSIM activation prompt again. If the carrier linked the wrong device record, give support the EID from Settings > About phone. A missing push usually points to provisioning, not the Pixel 7 menu itself.
Why does activation fail after download?
Stay on Wi‑Fi and return to Settings > Network & internet > SIMs to confirm the line is enabled. If the profile downloaded but service stays inactive, the carrier may still need to finish provisioning on its side. Ask them to verify the line, then retry once the account is updated.
Why do menus look slightly different on 7, 7 Pro, and 7a?
Use the same path first: Settings > Network & internet > SIMs. The wording around Download a SIM instead can shift with Android version, but the route is the same across Pixel 7, Pixel 7 Pro, and Pixel 7a. If needed, search Settings for SIMs and follow that result.
A common first-timer mistake is trying to scan a QR code from the same Pixel 7 that needs the eSIM. That leaves no clean way to point the camera at the code. Manual entry avoids the loop and is usually the fastest fix when the code lives on the same screen.
Prevention: Keep the QR, SM-DP+ details, and EID ready before you open SIM settings. That reduces failed scans and shortens the time the phone spends between profiles.
Frequently asked questions
Can I add an eSIM to Pixel 7 without a QR code?
Yes. Use carrier push if the provider supports it, or enter the SM-DP+ address and activation code manually. If the carrier needs device verification, give the EID from Settings > About phone. That is the clean fallback when the QR is missing or cannot be scanned.
Does Pixel 7 support two eSIMs at once?
Pixel 7 series can support dual eSIM behavior, but the carrier, region, Android version, and line type determine what is actually enabled. Some setups allow two active lines, while others do not. Set defaults in Settings > Network & internet > SIMs after both profiles are active.
Why won't my Pixel 7 scan the eSIM QR code?
The code may be damaged, expired, too dim, or shown on the same phone. Try a brighter display, a cleaner camera view, or manual SM-DP+ entry from Settings > Network & internet > SIMs. If the carrier issued the code, ask for a fresh one and verify the line assignment.
Do I need Wi‑Fi to install an eSIM on Pixel 7?
Wi‑Fi is the safest path for the first download because the profile has to be fetched during setup. Weak or captive networks can interrupt the process. If the phone sits on a hotel or guest network, complete the portal login before returning to Download a SIM instead.
Does my Pixel 7 need to be unlocked for eSIM?
Unlocked is better, especially for travel eSIMs and third-party providers. A carrier-locked phone can block some activation paths or limit carrier choice. If the line will not add, check the unlock status with the seller or carrier before trying a different eSIM provider.
Can I use a physical SIM and eSIM together on Pixel 7?
Yes. Pixel 7 can run a physical nano-SIM plus one eSIM at the same time, and some carrier combinations can support more advanced dual-SIM behavior. Set the default call, text, and data lines in Settings > Network & internet > SIMs after both profiles are active.
How do I activate a carrier eSIM on Pixel 7 after setup?
Open the carrier app, sign in, and look for the activation prompt or notification. For carrier-managed flows, accept the eSIM prompt and continue with the setup button the provider shows. If nothing appears, ask support to resend the profile and confirm the EID they have on file.
What changed with Pixel 7 eSIM compared with Pixel 6?
Pixel 7 series may support broader dual-SIM behavior than older Pixel guidance, but the carrier still decides what is allowed. The setup path is still the same general route in Settings > Network & internet > SIMs, yet the final behavior depends on carrier, region, and Android version.
How do I know if my Pixel 7 has eSIM hardware?
Pixel 7, Pixel 7 Pro, and Pixel 7a all support eSIM functionality. If you can open Settings > Network & internet > SIMs and see Download a SIM instead, the phone is set up for eSIM activation. Carrier approval and unlock status still decide whether a line will provision.
Does Pixel 5 support eSIM?
Pixel 5 support depends on carrier and region rules, so treat it separately from Pixel 7 guidance. Google Pixel 7, Pixel 7 Pro, and Pixel 7a all support eSIM in the same setup flow, while older Pixels can have narrower carrier-specific limits.
Does Google Pixel support eSIM?
Many Pixel phones support eSIM, but the exact carrier and region rules vary by model. For Pixel 7 series, the practical path is Settings > Network & internet > SIMs, then QR, carrier push, or manual SM-DP+ entry. Always confirm the carrier supports the specific device before activation.