If your Pixel 8 joins other Wi‑Fi but not your EE router, the router is usually the problem. If it fails on every network after a reset, the phone is the likelier fault. Ignoring it can leave you stuck on mobile data, unable to work, stream, or pass a stable connection to other devices. This guide gives a fast diagnosis tree for EE security settings, saved-network corruption, and Pixel 8 Wi‑Fi hardware faults.

What the symptom usually means

The first split is simple: either the Pixel 8 cannot see the SSID at all, or it can see the network but will not join, save, or stay connected. Those point to different causes. If mobile data works and Wi‑Fi does not, the handset is still online, which helps narrow the fault.

Start with the fastest check

Restart the Pixel 8 and the EE router, then try the network again. If that fails, forget the EE network on the phone and re-enter the password exactly as written on the router label or in EE’s admin settings.

What each symptom usually means

A network that is invisible points more toward band, SSID, or radio problems. A visible network that rejects the password often points to WPA2/WPA3 compatibility or a saved credential mismatch. A connection that drops after joining often points to corrupted saved data, band steering, or a software issue after an update.

Say your Pixel 8 sees a neighbor’s network and your EE SSID, but only the neighbor’s network connects. That usually points away from the phone’s Wi‑Fi radio and toward the EE router’s security or band settings.

Likely causes, from most common to least common

Most often, the issue is router/security compatibility or a bad saved network profile on the Pixel 8. Less commonly, a recent Android or Pixel update leaves Wi‑Fi settings unstable. If none of the software and router checks help, the pattern starts to look like a handset fault.

EE router settings or security mismatch

WPA2, WPA3, and mixed mode can behave differently across devices. An authentication failure can mean the password is correct but the protocol handshake is not. Band steering can also push the phone between 2.4 GHz and 5 GHz in a way the connection does not recover from cleanly.

Corrupted Pixel 8 network data

The phone may remember an old password, a stale DHCP lease, or broken Wi‑Fi settings. In that case, the network appears saved but never completes the join.

Recent software update or app conflict

If the issue started right after a Pixel 8 or Android update, timing matters. Safe mode helps separate a third-party app from the system itself. If Wi‑Fi works in safe mode, an app or service may be interfering.

Possible Pixel 8 hardware fault

If the phone cannot see any Wi‑Fi networks, fails across multiple EE routers, or dies during initial setup, the Wi‑Fi radio or related hardware may be at fault. Repeated failure after a network reset is another warning sign.

EE Wi‑Fi security and band checks

Use these checks before deeper phone resets. They separate a router-side mismatch from a Pixel 8 fault faster than broad troubleshooting. The key tests are 2.4 GHz, 5 GHz, a guest network, and the router’s security mode.

Test 2.4 GHz and 5 GHz separately

  1. Open the EE router settings and confirm whether the 2.4 GHz and 5 GHz bands share one SSID or use separate names.
  2. If the bands are combined, split them into separate SSIDs if the router allows it.
  3. Join the Pixel 8 to 2.4 GHz first, then test 5 GHz.
  4. If one band works and the other fails, leave the working band active and note the failure pattern.

Check WPA2, WPA3, or mixed mode

  1. In the router admin page, check the wireless security mode.
  2. Set it to WPA2 or WPA2/WPA3 mixed mode if WPA3-only is enabled.
  3. Reconnect the Pixel 8 with the current password.
  4. If authentication fails immediately, test again on the guest network.

Use a guest network and reboot the router

  1. Turn the router off for 30 seconds, then power it back on.
  2. Create or enable a guest SSID if available.
  3. Join the Pixel 8 to the guest network.
  4. If the guest network works, the main SSID likely has a security or band setting problem.

Why is my Pixel 8 not connecting to EE Wi‑Fi?

Most often, the Pixel 8 is seeing the network but failing at authentication, or it is reconnecting to a saved profile that no longer matches the router. Start by forgetting the EE network, checking the exact SSID, and re-entering the password. Then reboot both phone and router.

Forget the network and re-enter credentials

  1. Open Settings > Network & internet > Internet.
  2. Tap the EE network.
  3. Choose Forget.
  4. Re-select the SSID and type the password again.

Check the exact SSID and saved credentials

  1. Confirm the SSID spelling in the router admin page or router label.
  2. Look for hidden spaces or a second EE network with a similar name.
  3. If the router uses separate bands, join the one with the exact SSID you intend.
  4. Reboot the Pixel 8 after saving the network.

Reboot both phone and router

  1. Power off the Pixel 8.
  2. Unplug the EE router for 30 seconds.
  3. Power the router back on and wait for full sync.
  4. Restart the Pixel 8 and try the network again.

Why does it say saved but not connect?

That usually means the phone stored the network name and password, but the join step is failing. The most common reasons are a bad saved profile, WPA2/WPA3 mismatch, or a router-side band issue. If the password is rejected only after saving, treat it as an authentication problem first.

Remove the saved network and add it again

  1. Go to Settings > Network & internet > Internet.
  2. Select the EE network and tap Forget.
  3. Reconnect and re-enter the password manually.
  4. If it still says saved but not connected, try the guest network next.

Check whether authentication fails immediately

  1. Watch the connection message after you tap the SSID.
  2. If it fails before getting an IP address, suspect security mismatch.
  3. Switch the router to WPA2 or WPA2/WPA3 mixed mode.
  4. Test again on 2.4 GHz, then 5 GHz.

Test with another EE router or hotspot

  1. Try a different EE broadband network if one is available.
  2. If the Pixel 8 joins that network, the original router is the stronger suspect.
  3. If the phone also fails on a hotspot, the fault is more likely on the handset.

Pixel 8 Wi‑Fi decision table

Use this table as a fast branch point. Match the symptom you see, then try the fastest test listed before moving to the next row.

Symptom Most likely cause Fastest test Next action
Network not visible Band issue, hidden SSID, or radio fault Check 2.4 GHz and 5 GHz separately Try the guest network; if no networks appear, suspect the handset
Password rejected WPA2/WPA3 mismatch or wrong saved credential Forget the network and re-enter the password Set router to WPA2 or mixed mode
Saved but not connecting Corrupted network profile Remove the saved SSID and add it again Reset Wi‑Fi, mobile & Bluetooth if it repeats
Works on mobile data only Wi‑Fi join failure, not a general outage Join a guest network or hotspot Compare router settings with another device
Works on 2.4 GHz but not 5 GHz Band steering or 5 GHz compatibility issue Split the SSIDs and test 5 GHz alone Keep the working band active or adjust router settings
Drops after an update Software regression or cache/settings corruption Boot into safe mode If safe mode helps, review recently added apps
Fails on multiple EE routers Phone-side fault more likely Test a hotspot and a guest network Proceed to network reset and hardware checks
Fails after network reset Possible hardware fault Try the initial setup flow again on another network Seek repair or replacement if it still cannot join

When the fault points to the Pixel 8

If the same problem follows the phone across different EE routers, and the network reset does not help, the balance shifts toward the Pixel 8 itself. Safe mode, update timing, and repeated setup failure are the clearest signals.

Use safe mode to rule out app interference

  1. Press and hold the power button.
  2. Touch and hold Power off, then tap OK to restart in safe mode if offered by the device build.
  3. Try joining the EE Wi‑Fi again.
  4. If Wi‑Fi works in safe mode, remove recently added apps one by one after normal restart.

Try after a recent Android or Pixel update

  1. Go to Settings > System > System update.
  2. Confirm whether the issue began right after an update.
  3. Restart the phone once more after the update completes.
  4. If the problem started immediately after updating, note that timing for support.

Watch for no-network detection across multiple routers

A phone that cannot see any Wi‑Fi SSIDs, even near different routers and hotspots, points more strongly to a hardware issue. A setup failure during first use is another strong warning sign.

Suppose the Pixel 8 connects at a café hotspot but not at home. That leans toward the EE router. Suppose it fails to see both the hotspot and the home SSID after a reset. That leans toward the handset.

Still not working?

Still not working?
A person holds a smartphone while pointing at its screen

If the router checks, password checks, band tests, safe mode, and the network reset all fail, move to the most invasive software step first. If that still does not restore Wi‑Fi, ask for repair or replacement rather than repeating the same reset cycle.

Run Android network reset

  1. Open Settings > System > Reset options.
  2. Tap Reset Wi‑Fi, mobile & Bluetooth.
  3. Confirm the reset.
  4. Rejoin the EE Wi‑Fi network and re-enter the password.
Settings > Network & internet > Advanced network settings > Network reset

ipconfig /release
ipconfig /flushdns
ipconfig /renew
netsh winsock reset
netsh int ip reset

Device Manager > Network adapters > (adapter) > Uninstall device, then scan for hardware changes

Check repair or replacement thresholds

Treat the phone as a likely hardware fault if it cannot see networks, fails on multiple routers, fails after a network reset, or stops working during initial setup. At that point, the next step is vendor support or a warranty claim, not another router reboot.

What to tell EE or Google support

  1. List the exact symptom: invisible SSID, password rejection, saved but not connected, or dropouts.
  2. State whether 2.4 GHz, 5 GHz, guest Wi‑Fi, and a hotspot were tested.
  3. Note whether safe mode changed the result.
  4. Say whether the issue began after an update.

Prevention

Keep the EE router on WPA2 or WPA2/WPA3 mixed mode unless every device on the network supports WPA3 cleanly. If you rename the SSID or change the password, update the Pixel 8 immediately so it does not cling to stale saved credentials.

Keep reading

Frequently asked questions

Why is my phone not working with the wifi?

If the phone works on mobile data but not Wi‑Fi, the problem is usually local to the Wi‑Fi profile, router security, or the handset radio. Start with a guest network, then forget the SSID and re-add it. If that fails on more than one router, move to network reset and support.

Why is my phone not picking up wifi?

If no SSIDs appear, test both 2.4 GHz and 5 GHz first, then move closer to the router. If the phone still sees nothing on multiple networks, open Settings > System > Reset options > Reset Wi‑Fi, mobile & Bluetooth. Persistent invisibility after that is a repair sign.

Why won't my phone recognize my wifi network

That usually means the network is visible to other devices but not accepted by the Pixel 8. Check the exact SSID, then switch the router to WPA2 or WPA2/WPA3 mixed mode. If the phone only fails on the main SSID and works on guest Wi‑Fi, the router settings are the stronger suspect.

Why is my android phone not picking up wifi?

On Android, the usual split is between a router issue, a saved-network issue, and hardware. Use safe mode to rule out app interference, then test a hotspot. If Android still sees no networks after a reset, the Wi‑Fi radio or related hardware may need service.

Why is my pixel 8 not connecting to ee wifi?

Most often, the Pixel 8 and EE router disagree on security or band settings. Try 2.4 GHz, then 5 GHz, and test guest Wi‑Fi. If the phone connects elsewhere, the EE router is the better suspect; if it fails everywhere, move to network reset and hardware checks.

What should I do if my pixel 8 can connect to mobile data but not wifi?

That means the mobile network path is fine, so focus on Wi‑Fi only. Forget the EE network, re-enter the password, test guest Wi‑Fi, and compare 2.4 GHz with 5 GHz. If all Wi‑Fi joins fail, run the Android network reset and then contact support if the fault remains.