Use Settings for a normal Pixel 9 Pro XL wipe: Settings > System > Reset options > Erase all data, or use Recovery mode if you’re locked out. Skip a bad reset and you can lose access, leave data behind, or hand over a phone that still asks for your Google account. This guide shows the right reset path, the exact steps, the recovery fallback, and the post-reset checklist.
What a Pixel reset means
A factory reset erases files on the phone and returns the Pixel 9 Pro XL to an out-of-box state. Use the Settings route when the screen works and you can open the phone. Use Recovery mode when the screen is black, touch does not work, or the device stalls before Android finishes loading.
Factory reset versus hard reset
On the Pixel 9 Pro XL, a Settings wipe is the clean path. Recovery mode is the hardware path. Both remove installed apps and local data, but the recovery route is the one to use when the phone will not let you reach the menus.
What data gets erased
A wipe clears photos, contacts stored only on the device, messages, app data, and installed apps. Google backup can copy data to Google Drive automatically if it is enabled before the reset. If the phone is protected, you may also need the screen lock PIN or password before the wipe starts.
When a reset is the right fix
Google lists factory reset as a fix for a slow, buggy, or unstable smartphone. Use it for corruption, repeated crashes, failed setup, or a phone that is yours but acting erratically. Do not expect it to fix hardware trouble such as a dead battery, liquid damage, or a physically broken display.
Likely causes before you reset
Start by matching the symptom to the least risky path. If the phone still opens, the Settings wipe is usually best. If the screen works but Android is stuck, Recovery mode is the better fallback. If the phone is locked, black, or unresponsive, you may need the hardware path or a repair decision instead.
You can still unlock the phone
Use the Settings reset when you can reach the home screen and open apps. This avoids the extra recovery steps and lets you confirm the wipe with your PIN or password before anything is erased.
- Open Settings.
- Tap System.
- Tap Reset options.
- Select Erase all data (factory reset).
- Enter your PIN or password if prompted.
- Confirm the erase and wait for the restart.
The screen works but the phone is stuck
Suppose the Pixel 9 Pro XL still shows the display, but it keeps looping on the boot screen after an update. Recovery mode is the next step. Use it when Android will not finish loading, even though the buttons and screen still respond.
- Power the phone off if you can.
- Press Volume Down + Power to reach the bootloader.
- Use the volume keys to select Recovery mode.
- Press the Power button to confirm.
The phone is locked, black, or unresponsive
A common first-timer mistake is trying to force the wrong menu path on a phone with no working touch input. If the screen is black or the phone will not respond, Recovery mode is the main option. If the device still will not react, the problem may be hardware rather than software.
- Connect the phone to a charger for a short charge cycle.
- Try Volume Down + Power again to reach the bootloader.
- Select Recovery mode with the volume keys.
- If the phone reaches Android Recovery, continue with the wipe steps below.
How do you factory reset from Settings?
Use the Settings app when the Pixel 9 Pro XL still opens and you want the standard wipe path. The route is Settings > System > Reset options, then Erase all data (factory reset). If protection is enabled, the phone will ask for your PIN or password before it starts.
Back up first with Google
Before you erase anything, make sure Google backup is on. The guide path is System > Advanced > Backup. Google Pixel can back up to Google Drive automatically, which helps preserve photos, contacts, messages, and app data.
- Open Settings.
- Tap System.
- Tap Advanced.
- Tap Backup.
- Turn on backup and confirm it is current.
Confirm the wipe
After you select Erase all data (factory reset), read the prompt carefully. On protected devices, the PIN or password check is normal. Stop here if you have not finished your backup or if you are handing the phone to someone else and still need to remove your own accounts first.
- Tap Erase all data (factory reset).
- Enter your screen lock if asked.
- Confirm the reset.
- Wait for the phone to restart and erase itself.
How do you hard reset in Recovery mode?
Use Recovery mode when the Pixel 9 Pro XL cannot be reset from Settings. The hardware path starts with Volume Down and Power, then moves into Recovery mode. In Android Recovery, the wipe option is labeled wipe data/factory reset, and the menu ends with reboot system now.
Enter Recovery with the power and volume buttons
Use the button path when the phone will not load Android far enough to open Settings. On a Pixel, the recovery guide starts with Volume Down and Power, then selection moves to Recovery mode with the volume keys and Power button.
- Turn the phone off, or hold the Power button until it stops responding.
- Press Volume Down + Power to open the bootloader screen.
- Use the volume keys to highlight Recovery mode.
- Press Power to confirm.
Use the No command screen
After you confirm Recovery mode, Pixel phones commonly show No command first. That screen is expected. It is the bridge into Android Recovery, not a failure. From there, the recovery menu appears after the button sequence that Pixel uses on this device class.
- At the No command screen, press and hold Power.
- Tap Volume Up while holding Power if the menu does not appear immediately.
- When Android Recovery appears, use the volume keys to move.
- Press Power to choose the highlighted option.
Wipe the phone from recovery
Once you are in Android Recovery, choose wipe data/factory reset. This is the same erase action as the Settings path, but it is designed for a phone that cannot get into the normal menus. Finish by selecting reboot system now.
- Highlight wipe data/factory reset.
- Press Power to confirm.
- Choose the confirmation option if prompted.
- Select reboot system now when the wipe completes.
Can you reset a locked Pixel 9 Pro XL?
Yes, but a reset does not remove ownership checks. Factory Reset Protection can still ask for the previously synced Google account after the wipe. If you reset without that account, the phone may erase the data yet still block setup until the right sign-in is entered.
Factory Reset Protection and account verification
FRP is the sign-in check that appears after a reset on a protected Pixel. The locked-device guidance says you need your Google account and password after reset. That is why a wipe is not a shortcut around ownership.
- Reset the phone only if you know the Google account that was on it before.
- At first setup, sign in with that same account.
- If you sold or gave away the phone, remove your account before wiping it.
- If you forgot the account details, recover the Google account before setup.
What to do if you forgot the account
If the account is gone, do not keep repeating resets. The device can still return to the Google sign-in check. Use account recovery first, then continue setup once you can verify ownership.
- Use Google account recovery from another device.
- Recover the password for the account that was previously synced.
- Return to the Pixel 9 Pro XL setup screen and sign in again.
Pixel 9 Pro XL reset decision table
Choose the path that matches the symptom before you wipe anything. The table below separates the normal Settings reset from the recovery-mode hard reset, then shows what you must do after the wipe.
| Symptom | Best reset method | Button sequence | Data-loss risk | Post-reset requirement |
|---|---|---|---|---|
| Phone unlocks normally | Settings reset | Settings > System > Reset options > Erase all data (factory reset) | High | Sign in with the Google account and restore backup |
| Screen works, but Android is stuck | Recovery mode reset | Volume Down + Power > Recovery mode > wipe data/factory reset > reboot system now | High | Complete FRP sign-in and reactivate eSIM if needed |
| Black screen or broken touch | Recovery mode reset | Volume Down + Power > Recovery mode > wipe data/factory reset | High | Verify Google account access before setup |
| Locked device after transfer or sale | Recovery mode reset only if you know the account | Volume Down + Power > Recovery mode | High | FRP sign-in with the previously synced Google account |
Fast checklist before you wipe
- Backup: Check that Google backup is on under System > Advanced > Backup.
- Google account: Know the password for the account that was synced to the phone.
- eSIM: Plan to reactivate the eSIM after setup if your carrier requires it.
Still not working?
If the phone still will not reset, repeat the recovery path once after a short charge cycle. If the device cannot reach Recovery mode, keeps freezing on the logo, or shows a dead screen after charging, the reset is probably the wrong fix. That points more toward support, a repair visit, or a hardware fault.
When to stop and seek support
Stop pushing resets if the phone has a shattered display, water exposure, or no sign of life on a known-good charger. Those problems usually need repair, not a wipe. If you plan to sell, trade in, or pass down the Pixel 9 Pro XL, make sure your Google account is removed before the reset so the next owner is not blocked.
- Try one more Recovery mode attempt after charging.
- If the phone still fails, contact Google support or the carrier.
- If the device is being transferred, remove accounts before handing it over.
Frequently asked questions
How do you factory reset Pixel 9 Pro XL?
Open Settings > System > Reset options > Erase all data (factory reset). If the phone is protected, enter your PIN or password when prompted. After the wipe, sign in with the Google account that was previously on the phone and restore your backup if you have one.
How do you reset Pixel 9 Pro XL from Settings?
Go to Settings > System > Reset options, then tap Erase all data (factory reset). That is the standard wipe path for a working phone. Back up to Google Drive first through System > Advanced > Backup so your photos, contacts, messages, and app data can come back.
How do you hard reset Pixel 9 Pro XL in Recovery mode?
Use Volume Down + Power to open the bootloader, select Recovery mode, handle the No command screen, then choose wipe data/factory reset. Finish with reboot system now. This is the fallback when the screen works poorly or Android will not load.
How do you factory reset Pixel 9 Pro XL without password?
If the phone is already locked with a screen PIN or password, the Settings path may stop at the protection prompt. Recovery mode can still erase the phone, but FRP may ask for the previously synced Google account afterward. If you do not know that account, recover it before setup.
How do you factory reset Pixel 9 Pro XL without screen?
Use Recovery mode. The path starts with Volume Down + Power, then Recovery mode, then wipe data/factory reset. If the screen is completely dead, the bigger issue may be hardware rather than software, so a reset may not finish or may not be visible.
What happens after a Pixel factory reset?
The phone restarts, asks for initial setup, and may require the previously synced Google account because of Factory Reset Protection. After that, restore your backup, reconnect Wi‑Fi, and reactivate the eSIM if your carrier uses one. Apps and data that were only on the phone will be gone.
How do you avoid losing data before resetting a Pixel?
Turn on backup first under Settings > System > Advanced > Backup. Check that Google backup is current before you choose Erase all data (factory reset). If you are planning to sell or pass down the phone, remove your Google account before the wipe so the next setup is not blocked.
How do you reset a locked Google Pixel phone?
Use Recovery mode if you cannot unlock the device. Enter with Volume Down + Power, select Recovery mode, then use wipe data/factory reset. Afterward, be ready to sign in with the same Google account that was on the phone before the reset.
How do you factory reset Pixel 5?
The older Pixel 5 uses the same general reset ideas: Settings for a normal wipe and Recovery mode for a locked or unresponsive phone. The menu wording can differ by Android version, so check the phone’s own Settings > System and recovery screens before confirming anything.
How do you reset Pixel 5?
Use the same basic flow as other Pixels: back up first, then wipe from Settings > System > Reset options if you can unlock it. If the phone will not open menus, use the hardware recovery path and choose the wipe option there. Finish with a Google account sign-in if prompted.