For hotspot setup, turn on Mobile Hotspot, set Security to WPA2-Personal, choose 2.4 GHz for older devices, and verify the password exactly. Many connection failures come from a band mismatch or a wrong security setting. If you skip those checks, older phones, laptops, and tablets may never see the hotspot, or they connect and then drop.

What you'll need

  • A Galaxy S23 with mobile data service
  • A tethering plan if your carrier requires one
  • The device you want to connect
  • Your hotspot name, password, and band choice ready to edit

How do you turn on hotspot on a Galaxy S23?

How do you turn on hotspot on a Galaxy S23?
A Galaxy S23 phone shows the Mobile Hotspot settings screen

Open Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot, then switch Mobile Hotspot on. If the phone asks to turn off Wi-Fi, accept that prompt so the hotspot can start. Before you connect another device, review the hotspot name and password on the same screen.

  1. Open Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot.
  2. Turn on the Mobile Hotspot switch.
  3. If prompted, turn off Wi-Fi on the phone.
  4. Review the hotspot name and password before pairing a second device.

Samsung says Mobile Hotspot shares the phone’s mobile data connection over Wi-Fi, so the second device does not use the phone’s Wi-Fi connection. Other devices connect by finding the phone’s Wi-Fi network, and Samsung support also offers QR code pairing when that device supports it.

What the other device should do

On the laptop, tablet, printer, or console, open the Wi-Fi list and select the Galaxy S23 network name. Enter the password exactly as shown on the phone. If the device offers QR code setup, use that instead of typing the password.

How do you change the hotspot settings?

How do you change the hotspot settings?
A Samsung phone shows the mobile hotspot settings screen beside its box

Open the hotspot configure screen and change the name, password, and security type before saving. Use WPA2-Personal for a protected connection, especially when other people or nearby devices may see the network. If the device is older, pick 2.4 GHz first; 5 GHz is faster in some cases, but some phones and accessories do not support it.

  1. Go to Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot.
  2. Open Configure or the edit screen.
  3. Change the Network name and Password.
  4. Set Security type to WPA2-Personal.
  5. Choose 2.4 GHz for older hardware or 5 GHz when compatibility is not a problem.
  6. Save the changes, then reconnect the other device.

AT&T says you can choose the security type on the configure screen, and the password field is editable before saving. That matters because a wrong password can look like a network fault when the fix is only to match the saved password exactly.

Why is your hotspot not visible?

Why is your hotspot not visible?
A Samsung phone shows the Mobile Hotspot settings screen beside its box

If other devices cannot find the Galaxy S23 hotspot, check the hidden network option under Advanced first, then confirm the hotspot is still on after the screen locks or the phone sleeps. If battery saver or the timeout setting cuts it off too quickly, the network can disappear before a second device finishes searching.

  1. Open Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot.
  2. Open Advanced.
  3. Turn off Hidden network if it is enabled.
  4. Check Turn off when no device connected for and choose a longer timeout if needed.
  5. On the other device, open the Wi-Fi list again and rescan.

Say your 2018 printer finds Wi-Fi on a shelf across the room, but it never lists the Galaxy S23 hotspot. Hidden network and band mismatch are the first settings to check, not the printer itself. Switch to 2.4 GHz and rescan before changing anything else.

Why can a device see the hotspot but not join?

When the hotspot is visible but a specific device still fails to join, switch from 5 GHz to 2.4 GHz first. That failure pattern is common with older laptops, tablets, printers, and consoles. Then recheck the password, confirm the security type, forget the network on the other device, and try again.

  1. Go to Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot.
  2. Open Configure and set Band to 2.4 GHz.
  3. Confirm Security type is WPA2-Personal.
  4. Re-enter the Password on the other device.
  5. On the other device, choose Forget network, then reconnect.
  6. If the issue remains, check whether your carrier account allows tethering.

Suppose a tablet sees the hotspot, shows the correct name, and still fails at the join step. If the tablet only supports 2.4 GHz, a 5 GHz hotspot can look correct and still fail. Changing the band usually answers that specific case faster than changing the password again.

How do you stop Galaxy S23 hotspot from turning off?

Use the timeout setting under the hotspot’s advanced options, then pick the longest setting that fits your battery needs. Verizon lists Turn off when no device connected for, with Never timeout, 5 minutes, 10 minutes, and 60 minutes as options. If the hotspot drops after sleep or screen lock, this setting is the first place to look.

  1. Open Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot.
  2. Open Advanced.
  3. Find Turn off when no device connected for.
  4. Choose Never timeout, 5 minutes, 10 minutes, or 60 minutes.
  5. Save the change, then retry the connection.

Use 60 minutes if you want a practical middle ground between battery drain and reliability during setup. If you are just pairing a laptop and expect frequent disconnects during setup, start with Never timeout, then reduce it later.

Do you need a tethering plan to use mobile hotspot?

Sometimes, yes. The same source notes that a tethering plan is needed on the service account, and carrier availability can vary by account. If hotspot settings look correct but the feature still will not start, check your plan first instead of changing every Wi-Fi option on the phone.

  1. Open Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot.
  2. Try turning the hotspot on.
  3. If the phone blocks activation or the carrier denies use, check your account’s tethering support.
  4. If your account includes tethering, return to Band, Security type, and Password settings.

Contact the carrier when hotspot will not start at all, or when the network appears but mobile data never passes through. Change phone settings first when the hotspot starts normally but only one device fails to connect.

Common mistakes

  • Leaving the hotspot on 5 GHz for older hardware that needs 2.4 GHz
  • Typing a password on the client device that does not match the saved hotspot password
  • Using Open security when you meant to protect the network with WPA2-Personal
  • Keeping Hidden network on when the other device cannot find the hotspot
  • Letting Turn off when no device connected for shut the hotspot down during setup
  • Assuming the carrier allows hotspot use without checking the tethering plan

Save the working band, password, and timeout once the device connects, so you do not have to hunt for them later. If you switch to a different laptop, printer, or console, start with the same 2.4 GHz profile first.

Hotspot compatibility matrix

Symptom Likely cause Best band Security setting Hidden-network toggle Timeout setting Next step
Hotspot not found Hidden network or band mismatch 2.4 GHz WPA2-Personal Off Never timeout or 60 minutes Re-add the network on the other device
Visible, but join fails Password mismatch or 5 GHz incompatibility 2.4 GHz WPA2-Personal Off 60 minutes Forget the network and reconnect
Connects, then drops Timeout or sleep behavior 2.4 GHz WPA2-Personal Off Never timeout Check sleep, screen lock, and battery saver settings
Hotspot starts, but no internet Carrier tethering not active Either band WPA2-Personal Off 60 minutes Confirm the tethering plan on the account

Keep reading

Frequently asked questions

How do you use hotspot on a Samsung Galaxy S23?

Open Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot, turn it on, and connect the other device from its Wi-Fi list. If the second device is older, set the band to 2.4 GHz first and keep the password matched exactly.

How do you turn on mobile hotspot on Samsung?

The same source says to use the Settings app under Connections. On the Galaxy S23, the full path is Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot, then switch it on and accept any Wi-Fi-off prompt if it appears.

How do I change the hotspot password on Galaxy S23?

Open the hotspot configure screen, edit the password field, and save the change before reconnecting anything. AT&T notes that the password field is editable before saving, so you can replace an old password instead of trying to work around it on the other device.

Why is my Samsung mobile hotspot not working?

Start with the settings that block the most connections: band, security, password, hidden network, and timeout. If the hotspot starts but data never passes through, check the carrier account for tethering support. If only one device fails, switch it to 2.4 GHz and try again.

How do I make my Galaxy S23 hotspot visible to older devices?

Set the band to 2.4 GHz, turn off Hidden network, and keep the hotspot awake long enough for the old device to scan. Older laptops, tablets, printers, and consoles often miss 5 GHz networks, even when the hotspot is active.

Should I use 2.4 GHz or 5 GHz for Galaxy S23 hotspot?

Use 2.4 GHz for older devices and for compatibility first. The same source lists 2.4 GHz or 5 GHz preferred, and AT&T notes that 5 GHz can be faster but some phones may not support it, so speed should come after compatibility.