Start with a known-good USB-C PD PPS wall charger and cable, then watch whether the Galaxy S23 shows its fast-charge icon. If it still warns about slow charging, the likely causes are heat, a port issue, a software change, or a charger that cannot deliver the right profile.
Understanding charge speeds and wattage limits
On the Galaxy S23 line, slow charging can mean two different things: the phone shows a warning, or the actual charge rate drops. Those are not the same. A warning can appear even when the battery is still filling normally, while a real slowdown means the phone is limiting current because of heat, hardware, or software conditions.
The base Galaxy S23 is commonly reported to support up to about 25W wired charging. The Galaxy S23+ and Galaxy S23 Ultra are commonly reported to support up to about 45W wired charging with a compatible 5A USB-C cable and charger. If your setup cannot meet those requirements, the phone may fall back to a lower rate and never show the fast-charge indicator.
Galaxy S23 slow charging diagnosis table
| Symptom | Likely cause | Fastest test | Expected result | Next step |
|---|---|---|---|---|
| Slow-charging warning only | Notification issue, cable, or adapter not meeting USB-C PD PPS needs | Unplug, then reconnect with a different wall charger and cable | Warning clears or fast-charge icon returns | Check adapter wattage and cable rating |
| No fast charge icon | Wrong cable, adapter limit, dirty port, or unsupported charger | Use the original or a known 5A USB-C cable with a wall charger | Icon appears and charge rate improves | Inspect the port and try another outlet |
| Charging stops at high battery temperature | Overheating | Let the phone cool, remove the case, and stop using it while plugged in | Charging resumes at a normal rate | Cut heat sources and stop screen-heavy use while charging |
| Charges slowly on a PC USB port | Port power limits | Move from the PC USB port to a wall charger | Charge speed rises immediately | Keep testing with a wall outlet charger |
| Slow charging after update | Software change or regression | Check the current software version and reboot once | Charge behavior returns to normal or changes after the next restart | Try Safe Mode, then reset settings |
Say your S23 Ultra charged normally from a wall adapter, then after a One UI update it starts warning about slow charging on the same cable. That points away from the battery and toward software, heat, or a changed charging profile.
Is your charger or cable the problem?
Most slow-charge complaints start here. A cable can look fine and still fail under load, and many third-party chargers may not support the PPS profile the S23 expects for top-speed wired charging. If the cable or adapter cannot negotiate the right power level, the phone falls back to slower charging.
- Use a wall charger, not a PC USB port.
- Try the original cable first, or a known-good USB-C cable rated for 5A if you need 45W on the S23+ or S23 Ultra.
- Check the cable ends for bent pins, loose fit, kinks, fraying, or heat damage.
- Swap the adapter, then the outlet, one at a time.
- If the phone fast-charges with one adapter but not another, replace the faulty adapter.
A common first-time mistake is blaming the phone when the charger is the weak link. If the same cable charges one device slowly and another not at all, the cable is the better suspect than the handset.
Could the charging port be causing the slow charging?
Yes. Debris in the USB-C port can keep the connector from seating fully, which can cut charging speed or stop charging altogether. Damage to the port pins can do the same. If the cable wiggles excessively or the phone charges only at certain angles, inspect the port before you reset anything.
- Power off the phone.
- Look into the USB-C port with a bright light.
- If you see lint, use a soft non-conductive brush to clear it.
- Do not use metal tools or a toothpick.
- Reconnect the cable firmly and test again with a wall charger.
If the port still feels loose, if debris keeps returning, or if charging works only when the connector is pressed sideways, that points to wear or damage. At that stage, repair makes more sense than repeated cleaning.
Is overheating slowing the charge?
Often, yes. The Galaxy S23 will reduce charging speed when battery temperature climbs, and that can happen during gaming, video recording, hotspot use, or charging in a hot room. Heat can also come from a thick case or a phone sitting on a soft surface that traps warmth.
- Stop screen-on use while charging.
- Close heavy background apps before plugging in.
- Remove the case and move the phone to a cooler, hard surface.
- Wait a few minutes, then reconnect the charger.
- If the battery temperature is still high, move charging to a cooler room.
Suppose the phone charges slowly on a desk beside a warm laptop, then charges faster in a cooler room with the case removed. That pattern points to thermal throttling, not a bad battery.
Did an update or app trigger the slowdown?
If the slowdown started right after a One UI or security update, check software before you assume hardware failure. Updates can change charging behavior, expose a bug, or leave a background app misbehaving. Start with the simplest software checks, then move to Safe Mode.
- Go to Settings > Software update > Download and install and confirm the phone is current.
- Restart the phone once after the update finishes.
- Open Settings > Battery and device care > Battery and close apps that are using heavy background activity before charging.
- Boot into Safe Mode using the method that matches your One UI version and side-key setup.
- Test charging in Safe Mode; if it improves, uninstall recent third-party apps one by one.
If Safe Mode makes no difference, reset settings before you consider a full wipe. A settings reset is less disruptive than a factory reset and can clear charging-related misconfigurations.
Still not working?
At this point, separate wireless charging, wired charging, and PC USB charging. If wireless charging is normal but wired charging is not, the cable, adapter, or port is still the stronger suspect. If both wired and wireless are slow, battery health or heat management becomes more likely.
- Test wireless charging with the same battery level.
- Test a different wall charger and cable on a wall outlet, not a PC USB port.
- If charging still fails after Safe Mode and settings reset, back up your data.
- Use a factory reset only after backup, because it will erase the phone.
- If the problem survives the reset, arrange battery or port service.
Prevention is simple here: keep the port clean, avoid charging in hot conditions, and use a charger that matches the S23 model you own.
Frequently asked questions
Why is my Galaxy S23 charging so slow?
The usual causes are a weak cable, an underpowered adapter, heat, a dirty port, or a software change. Start with a wall charger and a known-good USB-C cable, then check whether the phone is hot or whether the slow-charge warning appears only after a recent update.
Why does my Samsung phone say slow charging?
That warning usually means the phone is not getting the charging profile it expects, or it is limiting power because of temperature. If you are using a PC USB port, an older adapter, or a worn cable, swap to a wall charger first and see whether the warning clears.
What charger should I use for Galaxy S23 slow charging?
Use a USB-C PD PPS wall charger matched to your model: up to 25W for Galaxy S23, and up to 45W for Galaxy S23+ and S23 Ultra with a compatible 5A USB-C cable. A charger that lacks the right profile can still power the phone, but at a slower rate.
How do I fix slow charging on my Galaxy S23?
Check the cable and adapter first, then clean the USB-C port with a soft brush, then let the phone cool if it is warm. After that, update software, test Safe Mode, and only then move to reset settings or a factory reset if the problem remains.
Why is my Galaxy S23 slow charging after an update?
A recent One UI or security update can change charging behavior or expose an app conflict. Check Settings > Software update, reboot once, then test in Safe Mode. If the issue started immediately after the update and survives Safe Mode, a settings reset is the next step.