To connect a Logitech M240 by Bluetooth, turn it on, put it in pairing mode, then add it from your device’s Bluetooth menu. If it never appears, check pairing mode, Bluetooth settings, or battery first. Skip those checks and the mouse can stay invisible. Logitech’s product and support pages confirm the M240 uses Bluetooth Low Energy, works with Windows, macOS, Chrome OS, Linux, and Android, and supports Logi Options+ on compatible systems. This guide shows the M240 pairing steps for laptop, tablet, and phone, plus the fixes for a mouse that is powered on but missing from the device list.

What you need

  • Logitech M240 Silent Bluetooth Mouse with a fresh battery or a battery you know is still charged
  • A host device with Bluetooth turned on: Windows, macOS, Chrome OS, Linux, or Android
  • Enough space for the mouse to stay close to the host device during pairing
  • Optional: Logi Options+ on compatible macOS and Windows systems if you later want button customization

The M240 is a Bluetooth-only wireless mouse. Logitech describes it as a Bluetooth Low Energy mouse, so you pair it in the host device’s Bluetooth settings instead of plugging in a USB receiver. Logitech also lists support for Windows, macOS, Chrome OS, Linux, and Android, with Logi Options+ available on supported systems after pairing. See Logitech’s M240 product page and M240 support page.

M240 pairing checklist

M240 pairing checklist
A wireless mouse sits beside a laptop on a wooden desk
Symptom Likely cause Exact fix Success signal
Mouse not showing in Bluetooth Bluetooth off, the mouse is not in range, or another device still owns the connection Turn the M240 on, open Bluetooth on the host device, and keep the mouse close during scanning “Logitech M240” appears in the device list
Paired but pointer does not move Connected to the wrong device, low battery, or the host did not finish driver setup Remove the old pair in Bluetooth settings, restart Bluetooth, then pair the M240 again The cursor moves immediately after pairing
Paired to the wrong device The host device remembered a previous M240 pairing Open Bluetooth settings, choose Forget or Remove for the old entry, then pair again on the device you want The M240 appears under the correct device name
Bluetooth toggle is missing on a laptop Bluetooth adapter disabled, driver issue, or the laptop has no active Bluetooth radio On Windows, open Device Manager and enable the Bluetooth adapter; on macOS or Chrome OS, restart and recheck Bluetooth settings The Bluetooth switch returns and the scan list opens

How do you put the M240 into pairing mode?

Turn the mouse on, put it in pairing mode, keep it close to the host device, and open the Bluetooth menu on that device. The M240 is not usually ready for a new connection until it is in pairing mode and the host is scanning for devices. If it still does not appear, check the host Bluetooth settings and the battery first.

Exact first-time pairing sequence

  1. Flip the M240 power switch to on.
  2. Open the host device’s Bluetooth settings.
  3. Start a new device scan.
  4. Wait for Logitech M240 to appear.
  5. Select it and finish pairing.

On the M240, the clue that matters is simple: it must be powered on and visible to the host scan. If you already paired it elsewhere, the scan may not show it on the second device until the first connection is removed or turned off. A common first-timer mistake is searching in the wrong place, such as a dongle menu, when the M240 pairs in Bluetooth settings only.

On Windows, open Bluetooth settings, start a new device add flow, and select Logitech M240 when it appears. The mouse does not need a USB receiver. If Windows cannot see it, check that the Bluetooth adapter is enabled before you retry the scan.

Windows pairing steps

  1. Go to Settings > Bluetooth & devices.
  2. Turn Bluetooth on.
  3. Select Add device.
  4. Choose Bluetooth.
  5. Click Logitech M240 when it appears.
  6. Wait for the confirmation message, then test the pointer.

If fix Bluetooth issues on a Dell laptop shows no Bluetooth toggle at all, open Device Manager, expand Bluetooth, and enable the adapter if it is disabled. If the adapter is missing, reboot once and check Settings > Bluetooth & devices again. A missing switch usually means the host radio is off or unavailable, not that the M240 is faulty.

How to connect the Logitech M240 on macOS, Chrome OS, Linux, or Android

How to connect the Logitech M240 on macOS, Chrome OS, Linux, or Android
Close-up of a Lenovo wireless mouse on a white background

The same basic rule applies on every supported platform: open the device’s Bluetooth settings, scan for nearby devices, and select Logitech M240 when it shows up. The same source lists compatibility with macOS, Chrome OS, Linux, and Android, and Logi Options+ is optional rather than required for pairing. See Logitech’s M240 product page and M240 support page.

macOS pairing path

  1. Open System Settings > Bluetooth.
  2. Turn Bluetooth on.
  3. Wait for Logitech M240 to appear under nearby devices.
  4. Select it and confirm pairing.

Chrome OS pairing path

  1. Open Settings > Bluetooth.
  2. Turn Bluetooth on.
  3. Select the M240 from the scan list.

Linux pairing path

  1. Open your desktop environment’s Bluetooth panel.
  2. Enable Bluetooth.
  3. Start scanning and select Logitech M240 from the nearby devices list.

Android pairing path

  1. Open Settings > Connected devices > Pair new device.
  2. Turn Bluetooth on if it is off.
  3. Tap Logitech M240 when it appears.

SilentTouch reduces click noise by 90% while keeping a familiar click feel, so the M240 is easy to live with after setup. Logitech also lists an 18-month battery life with auto-sleep, which matters after pairing because it reduces how often you need to think about power. See Logitech’s M240 product page.

Why is the M240 not showing up?

Why is the M240 not showing up?
A blurred smartphone sits above a close-up of a wireless mouse

If the M240 powers on but never appears in scanning, the most likely causes are disabled Bluetooth on the host device, an old pairing still active on another device, or a weak battery. Keep the mouse close while the scan runs, then move it after pairing completes.

Check the host Bluetooth first

  1. Open the host device’s Bluetooth settings.
  2. Make sure Bluetooth is on and the scan screen is open.
  3. Restart Bluetooth once if the list stays empty.

Clear a stale pairing

  1. Open Bluetooth settings on the device that may already own the mouse.
  2. Remove or forget Logitech M240.
  3. Return to the device you want and scan again.

Reset the scan conditions

  1. Turn the M240 off, then back on.
  2. Move it close to the host device.
  3. Scan again from Bluetooth settings.

Picture a phone and a laptop both trying to claim the same mouse. The mouse may connect to the first one that sees it, and the second device will never list it until the first pairing is removed. That is common with multi-device setups, especially after a rushed first setup.

Common mistakes

  • Opening Bluetooth through a mouse utility instead of the system settings
  • Leaving the M240 too far from the host device during the scan
  • Assuming a remembered pairing means the mouse is ready on a second device
  • Skipping the battery check when the mouse powers on but does not advertise well
  • Looking for a USB receiver that the M240 does not use

If that did not work, try the next step: restart the host device, then repeat the add-device flow. On Windows, also remove any old Logitech M240 entry before scanning again. On macOS or Android, toggling Bluetooth off and back on often clears a stale scan list without any deeper reset.

What the M240 specs mean during setup

The M240 has three buttons and a wireless range that Logitech describes as up to 10 meters in open space. Those details do not change the pairing process, but they help after setup: if the mouse drops out, distance is one thing to check. For customization details, Logitech points users to Logi Options+ on supported systems.

Logi Options+ is supported on compatible macOS and Windows systems. Use it only after the mouse is already paired, since pairing itself still happens through the operating system’s Bluetooth settings. See Logitech’s Logi Options+ page and the M240 support page.

Keep reading

Frequently asked questions

Does Logitech mouse have Bluetooth?

The Logitech M240 does. It is a Bluetooth mouse that uses Bluetooth Low Energy and does not need a USB receiver. It works with Windows, macOS, Chrome OS, Linux, and Android, and the pairing step happens through the host device’s Bluetooth settings rather than a dongle menu.

What should I do if the M240 appears but will not connect?

Remove the M240 from Bluetooth settings, then pair it again from scratch. If it still refuses to connect, restart Bluetooth on the host device and check for a weak battery. A device that appears but will not connect usually has a stale pairing record or a host-side Bluetooth problem.

What if the M240 connects as an input device but the pointer is frozen?

Forget the mouse, then reconnect it and test on another surface. If the pointer stays frozen, confirm the host did not connect to a different pointing device, and make sure the battery is not low. Frozen input after pairing usually points to a bad reconnect, not a failed mouse.

What if the M240 reconnects to another device automatically?

Remove the old pairing from the device that keeps reclaiming the mouse, then pair the M240 on the device you actually want to use. If needed, turn Bluetooth off on the other device during setup. This prevents the mouse from jumping back to the first host that recognizes it.