First identify the mouse’s wireless type: Bluetooth, Logi Bolt, or Unifying; only Bluetooth mice usually appear in system Bluetooth, while receiver-only models need their USB dongle. Skip that check, and you can waste time pairing in the wrong menu and miss the real fix. This guide gives a model-and-connection decision tree, plus the fastest Mac and Windows steps for each case.
What the pairing failure means
“Not showing up” usually means the mouse is not broadcasting a Bluetooth pairing signal, the scan window has expired, or the computer is looking in the wrong place for that model. If it appears but will not pair, focus on old pairings, battery level, or the wrong connection method first. For Logitech’s own pairing and compatibility guidance, start at the Logitech Support portal and then open the exact model page for your device, such as Pebble Mouse 2 M350s, Signature Comfort M840 L, or Signature Comfort Plus M850 L.
Fastest first move: open the mouse’s pairing mode, then keep the system Bluetooth page open while it searches.
Not visible in scan results
This usually points to pairing mode, battery, or the wrong standard. A mouse that uses a receiver will never appear as a Bluetooth device, even though it still works wirelessly. Logitech’s model pages and setup guides will usually state this clearly; if you are unsure, compare the mouse against the Logi Bolt and Unifying compatibility notes in Logitech’s support library, including the dedicated comparisons for Logi Bolt vs Unifying and Logi Bolt vs Unifying mouse compatibility.
Visible but will not pair
That often means the mouse is discoverable but blocked by an old pairing entry, a stale Bluetooth cache, or another computer that is still connected to it.
Paired but unstable
This tends to be battery, distance, interference, or the wrong receiver path. If the model is Bluetooth plus receiver, switching to the receiver may be faster than fighting repeated drops.
Is your Logitech mouse Bluetooth?
Not every Logitech mouse is a Bluetooth mouse. Logitech sells Bluetooth-only models, Bluetooth plus Logi Bolt models, Bluetooth plus Unifying models, and mice that use LIGHTSPEED Wireless USB Receiver instead of Bluetooth. The exact model matters before you touch system settings.
Bluetooth-only models
These should appear in Mac or Windows Bluetooth when they are in pairing mode.
Bluetooth plus receiver models
Some models can pair through Bluetooth or through a receiver. Signature Comfort Plus M850 L is a wireless Bluetooth mouse with a palm cushion, and Logitech lists Bluetooth mice as compatible with Logi Bolt USB Receiver in some cases. For a deeper compatibility check, see the dedicated article on Logi Bolt vs Unifying and Logitech’s support pages for the exact model.
Receiver-only models
Some Logitech mice use LIGHTSPEED Wireless USB Receiver instead of Bluetooth. Those models will not appear in Bluetooth settings, so the fix is the dongle path, not device discovery. A good example is a Logitech G-series mouse that uses LIGHTSPEED, such as the G305 LIGHTSPEED Wireless Gaming Mouse; on that class of device, the USB receiver is the only pairing path, and Logitech’s product specs will state that directly on the model page.
How to put it in pairing mode
Pairing mode is a time-limited discovery window. If the mouse is not in that state, it may never appear in the scan list, even if Bluetooth is on and the computer is close by. Keep the Bluetooth settings page open while you trigger pairing.
- Turn the mouse on and check for a pairing button, switch, or long-press action on the underside.
- Hold the pairing control until the indicator flashes, then stop pressing it.
- On Windows, open Settings > Bluetooth & devices > Add device > Bluetooth.
- On Mac, open System Settings > Bluetooth and leave that page open while scanning.
- If the mouse name appears, choose it immediately before the discovery window times out.
If a compact mouse lights up once and then goes quiet, opening the Bluetooth page about 30 seconds later can miss the device entirely because the scan window may already have ended.
Why is it not showing on Mac?
macOS can miss a device that is not actively advertising, and a stale pairing can hide a mouse that should otherwise appear. If the mouse is Bluetooth-capable, check the Mac Bluetooth page first, then remove old entries and retry the scan before moving to a different device.
- Open System Settings > Bluetooth and turn Bluetooth off, then on again.
- Restart the mouse, then put it back into pairing mode.
- If the mouse name is listed, choose Forget This Device or remove it from the list, then pair again.
- Move the mouse close to the Mac and keep the Bluetooth page open while it scans.
- If it still does not appear, try pairing from another Mac or a phone to isolate the issue.
why is my logitech mouse not showing up in bluetooth on mac often comes down to scan timing, not a broken mouse. The model may be fine, but the Mac may be holding an old record or missing the brief discovery window.
Likely causes, ranked
Most often, the issue is the wrong wireless standard for the model, then pairing mode, then a stale pairing or an active connection elsewhere. After that come battery, range, and receiver or software issues. Work through those in order so you do not chase the wrong branch.
Wrong wireless standard for the model
- Check the mouse’s model name on the base, box, or on Logitech Support.
- Search Logitech Support by product name, model number, or part number.
- Confirm whether the mouse is Bluetooth-only, Bluetooth plus Logi Bolt, Bluetooth plus Unifying, or receiver-only.
- If the model needs a receiver, stop using Bluetooth and plug in the correct dongle.
Mouse is not in pairing mode
- Turn the mouse off, wait 5 seconds, then turn it back on.
- Press the pairing button or hold the pairing control until the LED flashes.
- Open the Bluetooth scan page first, then start pairing.
- If nothing appears, repeat once and keep the scan page open the whole time.
Old pairing or active connection blocks discovery
- On Mac, open System Settings > Bluetooth and remove the mouse if it is listed.
- On Windows, open Settings > Bluetooth & devices, select the mouse, and choose Remove device.
- Turn off Bluetooth on any other computer or tablet that may still be connected.
- Re-enter pairing mode and try again.
Battery, range, or receiver issue
- Charge the mouse or swap in a fresh battery.
- Move it within a few feet of the computer during pairing.
- If it uses a receiver, plug the Logi Bolt or Unifying receiver directly into the computer, not a hub.
- If the receiver branch still fails, test the dongle on another USB port.
Say your mouse pairs on a laptop but drops every few minutes on a desktop two rooms away. That points more to distance or interference than to Bluetooth setup.
Logitech mouse connection matrix
Use this table to match the mouse type to the symptom. The right fix depends on whether the model is Bluetooth-only, Bluetooth plus Logi Bolt, Bluetooth plus Unifying, or receiver-only. The last column tells you when to stop chasing Bluetooth and switch connection methods.
| Mouse type | Symptom | Next best fix | Stop and switch connection method |
|---|---|---|---|
| Bluetooth-only | Not visible | Put the mouse into pairing mode, then scan in System Settings > Bluetooth or Settings > Bluetooth & devices. | Yes, if the model lookup shows no Bluetooth support. |
| Bluetooth-only | Visible but won’t pair | Remove the old entry, restart Bluetooth, and re-enter pairing mode. | No, unless the mouse keeps failing on multiple computers. |
| Bluetooth-only | Paired but unstable | Charge or replace the battery, move closer, and remove other active connections. | Yes, if instability continues after the battery and range check. |
| Bluetooth + Logi Bolt | Not visible | Try Bluetooth first only if the model lists it; otherwise use the Logi Bolt USB Receiver. | Yes, if Logitech Support shows receiver-based use as the intended path. |
| Bluetooth + Unifying | Visible but won’t pair | Use the correct Unifying receiver pairing path, not the Bluetooth menu. | Yes, if the model is compatible only with the receiver standard. |
| Receiver-only | Any Bluetooth symptom | Skip Bluetooth and plug in the receiver. | Yes, immediately. |
Do you need Logi Bolt or Unifying?
Use Logi Bolt when the model is listed as Bluetooth plus Logi Bolt or when the receiver is the intended fallback. Use Unifying only for models that Logitech lists as compatible with that legacy receiver. The receiver type has to match the mouse; the wrong dongle will not pair it. Logitech’s own support pages are the safest source for this check, especially the product pages and spec sheets for your exact model.
When to use Logi Bolt USB receiver
- Check the mouse’s Logitech product page or support listing for Logi Bolt compatibility.
- Plug the Logi Bolt USB Receiver directly into the computer.
- Open the Logitech support article or app tied to that model, then follow the receiver pairing steps.
- If the mouse still refuses Bluetooth, leave Bluetooth alone and stay on the receiver path.
When to use Unifying USB receiver
- Confirm the model is one of Logitech’s Bluetooth plus Unifying devices.
- Plug the Unifying receiver into a USB port.
- Use the Logitech pairing tool or supported software for that legacy receiver, not the operating system Bluetooth menu.
- If the mouse is not on the compatible list, stop here and use the correct connection standard.
How to confirm model compatibility in Logitech Support
- Open Logitech Support and search by product name, model number, or part number.
- Check the downloads and apps area for the current software for that model.
- Open the support article for the exact mouse, not a similar-looking one.
- Look for the listed connection method: Bluetooth, Logi Bolt, Unifying, or receiver-only.
Receiver-only models: what the LIGHTSPEED dongle path looks like
If your mouse is a LIGHTSPEED model, the fix is not Bluetooth troubleshooting at all. A receiver-only mouse will not broadcast like a typical Bluetooth device, so the pairing process starts with the USB receiver and the Logitech pairing workflow for that exact product. For a concrete example, Logitech’s G305 LIGHTSPEED Wireless Gaming Mouse is designed around the LIGHTSPEED receiver path rather than a Bluetooth scan menu.
- Plug the LIGHTSPEED receiver directly into the computer, ideally into a rear USB port on a desktop or a direct port on a laptop.
- Turn the mouse on and keep it within a few feet of the receiver during setup.
- If the mouse has a connect or pairing button, press it once, then watch for the connection indicator on the mouse.
- If Logitech asks you to use its pairing utility for that model, follow the on-screen receiver pairing prompt instead of opening Bluetooth settings.
- Wait for the mouse cursor to respond, then confirm the receiver is not behind a dock, hub, or metal obstruction.
That receiver path matters because the system Bluetooth menu will never find a LIGHTSPEED-only mouse. If the dongle is missing, the only valid next step is to replace or reconnect the correct receiver for that model.
Still not working?
If the mouse is confirmed Bluetooth-capable and still fails after the correct pairing path, use another computer or phone to separate a mouse fault from an operating-system issue. If a receiver-based model still fails with the proper dongle, the next step is Logitech Support or vendor support for the exact model number.
Check the model’s connection type before buying a replacement battery, dongle, or software package.
Frequently asked questions
Why is my Logitech mouse not showing up in Bluetooth?
Check whether the model is Bluetooth-only or receiver-based first. Then open the Bluetooth settings page, put the mouse into pairing mode, and keep the scan window open. If it still does not appear, remove old pairings and retry on another computer to isolate the problem.
Why is my Logitech mouse not showing up in Bluetooth on Mac?
Open System Settings > Bluetooth, toggle Bluetooth off and on, and start scanning again while the mouse is in pairing mode. If the mouse is already saved, remove it and pair again. If it still does not appear, test with another Mac or a phone.
Why won’t my Logitech wireless mouse connect?
Confirm the connection standard first. If it needs a receiver, plug in the correct Logi Bolt or Unifying dongle. If it is Bluetooth-capable, remove the old device entry, recharge the mouse, and pair again from the system Bluetooth page.
Is the Logitech mouse Bluetooth?
Some are, and some are not. Logitech sells Bluetooth-only mice, Bluetooth plus Logi Bolt models, Bluetooth plus Unifying models, and mice that use LIGHTSPEED Wireless USB Receiver instead of Bluetooth. The exact model number is the fastest way to confirm which one you have.
How do I put a Logitech mouse into pairing mode?
Turn the mouse on, then press or hold the pairing control until the indicator flashes. On Mac, open System Settings > Bluetooth first; on Windows, open Settings > Bluetooth & devices > Add device > Bluetooth first. The scan window is time-limited.
Does my Logitech mouse need Logi Bolt instead of Bluetooth?
It may. Some Logitech mice are listed as Bluetooth plus Logi Bolt compatible, which means the receiver is the better path when Bluetooth discovery fails. Check the exact model on Logitech Support, then use the connection method that matches that listing.