Check Wi‑Fi first, then APN, network mode, band support, and SIM status. Reset network settings only after Wi‑Fi, APN, network mode, band support, and SIM status checks fail. A slow Xiaomi connection often means you are fixing the wrong layer, so compare Wi‑Fi and mobile data speeds separately before changing settings.
What slow Xiaomi network speed means
A slow Xiaomi connection can come from the router, the carrier, the SIM, the APN profile, or MIUI network settings. Split Wi‑Fi slowdown from mobile data slowdown before you touch recovery tools or factory reset options.
Start by checking whether the slowdown began after a SIM swap, carrier change, system update, or moving to a different area. Xiaomi phones use the MIUI user interface, and settings such as preferred network type, VoLTE, Wi‑Fi calling, and dual SIM data selection can all affect performance.
If Wi‑Fi pages are slow at home but 4G is normal outdoors, the router or Wi‑Fi band is likely the fault. If 5G is unstable after a carrier change, check APN, band support, and the SIM chosen for data.
Likely causes, from common to rare
- Weak Wi‑Fi signal, router congestion, or the wrong band.
- Wrong APN or carrier profile on mobile data.
- Preferred network type, VoLTE, Wi‑Fi calling, or dual SIM data choice.
- Carrier throttling, roaming limits, or an outage.
- Hardware trouble in the antenna, SIM tray contact, or modem.
Is Wi‑Fi the slow part?
If Wi‑Fi is the only slow connection, check the router band, signal strength, and channel congestion before changing Xiaomi settings. A phone can look faulty when the real issue is the access point, a crowded 2.4 GHz channel, or weak signal one room away.
Fix Wi‑Fi slowdown first
- Open Settings > Wi‑Fi and confirm the phone is connected to the intended network.
- Tap the network name, choose Forget network, then reconnect and enter the password again.
- Move closer to the router and run a speed test again on the same server if possible.
- If the signal is weak, switch to the router’s 5 GHz band when the phone and router both support it.
- If every device on the same router is slow, restart the router and check with the ISP before changing the phone further.
When to reset network settings
Use a network settings reset when Wi‑Fi, mobile data, and Bluetooth all feel unstable together. On Xiaomi, go to Settings > Connection & sharing > Reset Wi‑Fi, mobile networks, and Bluetooth. This usually does not erase personal files, but it does clear saved Wi‑Fi networks and paired devices.
Is mobile data slow on 4G or 5G?
Mobile data speed problems usually point to the SIM, APN, preferred network type, or a carrier-side restriction. Check Xiaomi cellular network settings before blaming the phone hardware. If one SIM is fast and the other is slow, the issue often sits with the SIM profile or carrier plan.
Fix Xiaomi cellular network settings
- Go to Settings > SIM cards & mobile networks.
- Tap the SIM used for data and confirm Mobile data is on.
- Check Preferred network type and set it to the carrier’s normal option, such as 5G/4G/3G auto if available.
- Open Access Point Names and compare the APN with your carrier’s default profile.
- If the APN looks wrong, use Reset to default or add the carrier APN manually.
Check VoLTE, 5G, and dual SIM behavior
- In SIM cards & mobile networks, check whether VoLTE is enabled for the correct SIM.
- If 5G is unstable, test the phone on 4G/3G/2G auto for one speed test, then switch back.
- If two SIMs are inserted, make sure the intended SIM handles Mobile data.
- Remove the second SIM for a short test if data routing looks inconsistent.
Do hotspot or Wi‑Fi calling fail?
Hotspot and Wi‑Fi calling can fail even when ordinary browsing still works. That usually means a carrier feature, band limit, or SIM setting is wrong. Check the feature tied to the problem rather than resetting the whole phone first.
Fix hotspot and Wi‑Fi calling
- For hotspot, go to Settings > Portable hotspot and confirm it is on.
- Switch the hotspot band to 2.4 GHz if the connected device is old, or 5 GHz if both devices support it.
- Check your carrier plan for tethering limits if devices connect but cannot reach the internet.
- For Wi‑Fi calling, open Settings > SIM cards & mobile networks and enable it for the correct SIM.
- If the device has dual SIMs, test with one SIM only so the carrier feature is tied to the right line.
Network speed diagnosis table
| Symptom | Likely cause | Exact MIUI setting to check | Safe fix | Data loss risk |
|---|---|---|---|---|
| Wi‑Fi is slow, but mobile data is fine | Weak signal, router congestion, or wrong band | Settings > Wi‑Fi | Forget the network, reconnect, move closer to the router, test 5 GHz | None |
| 4G or 5G is slow everywhere | Wrong APN, wrong preferred network type, carrier throttling, or SIM issue | Settings > SIM cards & mobile networks | Reset APN to default, recheck data SIM, test 4G/5G auto | None |
| Hotspot connects, but traffic is unusable | Band mismatch or carrier tethering rule | Settings > Portable hotspot | Change hotspot band, confirm tethering is allowed on the plan | None |
| Wi‑Fi calling will not register | Wrong SIM, feature off, or carrier provisioning problem | Settings > SIM cards & mobile networks | Enable Wi‑Fi calling on the active SIM, test with one SIM only | None |
| All network settings feel unstable | Corrupted network profile | Settings > Connection & sharing > Reset Wi‑Fi, mobile networks, and Bluetooth | Run the reset, then reconnect Wi‑Fi and recheck APN | Low; it clears saved network settings |
How to fix network speed on Xiaomi, step by step
Work in this order: Wi‑Fi, APN, SIM and network mode, then reset network settings only if the earlier checks fail. That order saves time and keeps you from wiping settings that may already be correct.
- Run a speed test on Wi‑Fi and mobile data separately so you know which layer is slow.
- Check Settings > Wi‑Fi for weak signal or a crowded band.
- Check Settings > SIM cards & mobile networks for the data SIM, preferred network type, and APN.
- Turn VoLTE and Wi‑Fi calling off and on only as a test, then leave the setting that restores stable service.
- Use Settings > Connection & sharing > Reset Wi‑Fi, mobile networks, and Bluetooth if the network profile seems corrupted.
- Re-run the same speed test after each change so you know which step fixed the bottleneck.
Before-and-after check
Use the same test app, the same server, and the same connection type before and after each change. A result that jumps from slow to normal right after an APN reset points to the carrier profile, while a jump after forgetting Wi‑Fi points to the router or band.
Still not working?
If the phone will not boot normally, or if the network problem appears alongside a Mi logo loop or fastboot loop, move to recovery steps. Boot loop and stuck logo symptoms often point to software failure, and they may need a data wipe or firmware repair instead of another network tweak.
Use recovery mode only when the phone will not boot
- Power off the phone if possible.
- Press Power + Volume Up to enter MIUI recovery mode.
- Use the volume keys to move and the power button to select.
- Choose Reboot first.
- If the phone still will not start normally, choose Wipe data only after backing up what you can.
Try a firmware or ROM update next
If recovery mode does not help, a firmware or ROM update may fix a system-level fault. Tenorshare lists firmware update as one recovery option, and some repair tools such as ReiBoot for Android are designed for that path. A PC may be required, depending on the model and the repair route.
When to contact the carrier or Xiaomi service center
Contact the carrier if APN resets, SIM reseating, and network mode checks do not restore mobile data speed. Contact a Xiaomi service center if the phone still shows weak signal, drops calls, or fails on every network after software fixes. Antenna damage or modem hardware faults need service, not another reset.
Prevention
Keep the active SIM profile correct after carrier changes, and recheck APN after a new SIM or plan swap. A wrong carrier profile is easy to miss, especially on dual SIM Xiaomi phones and Redmi or POCO models that carry different default network behavior by region and variant.
Frequently asked questions
How to turn wifi calling in Xiaomi
Open Settings > SIM cards & mobile networks, choose the correct SIM, and enable Wi‑Fi calling if your carrier supports it. If calls still fail over Wi‑Fi, test again with the other SIM removed so the device does not route the feature to the wrong line.
Wifi speed test Xiaomi
Run the test on Wi‑Fi and mobile data separately, not back to back on the same network. Use the same app and the same server each time, then repeat after every fix. That makes the result useful for deciding whether the router, APN, or SIM was the real bottleneck.