Turn off a stylus pen by choosing the right method for its type: power it down, disconnect it from the tablet or laptop, or remove its Bluetooth pairing. Pick the wrong one, and the pen can keep drawing, keep draining battery, or keep reconnecting to the wrong device. This guide shows the exact action for active, passive, and Bluetooth styluses on tablets and laptops.

What “turn off” means

What “turn off” means
A tablet and stylus lie on a wooden desk beside a notebook

“Turn off” usually means one of three different actions. A passive pen stops responding when it leaves the screen. An active pen may need a power button, a battery check, or a sleep state. A Bluetooth pen may need to be removed from the device list so it stops reconnecting.

Power down the pen

This applies to pens with a switch, button, charging circuit, or battery management. Use it when the pen keeps lighting up, responding, or draining power while idle.

Disconnect it from the device

This stops the current link without always removing the saved pairing. Use it when the pen still shows as connected on a tablet, laptop, or phone, but you only want to end the current session.

Remove Bluetooth pairing

This is the cleanest way to stop a Bluetooth stylus from reconnecting. It removes the stored pairing from the device’s Bluetooth list, so the pen should not auto-connect until you pair it again.

What you’ll need

  • The stylus model name, or the device it came with
  • The paired tablet, laptop, or phone nearby
  • Access to Bluetooth settings or pen settings
  • The charger, USB-C cable, or spare battery if the pen uses one
  • The device manual if the pen uses a brand-specific pairing method

Stylus pen decision table

Pen type Power button? Bluetooth involved? Exact stop-action What not to do
Passive capacitive pen No No Take it off the screen. It has no battery and no switch. Do not look for a power menu or pairing screen.
Active rechargeable pen Sometimes Sometimes Use the power button if the model has one. If it has a battery indicator, charge it or replace the battery as the model requires. Do not assume a blinking light means “off.”
Bluetooth pairing stylus Sometimes Yes Open Bluetooth settings and choose Forget, Remove, or Unpair on the device. Do not keep the pen in pairing mode and call it disconnected.
Apple Pencil variants Some have no power button Yes, for Pro and 2nd gen Stop the active connection from the iPad, then remove the Pencil from Bluetooth if you want it fully disconnected. Do not rely on unplugging a cable to end the link.
Samsung S Pen Often no Some models use Bluetooth Low Energy; some do not Remove the Bluetooth connection if your model uses it. If the pen activates when pulled out, reinsert it or leave it seated when idle. Do not assume every S Pen behaves the same way.
USI pen Varies by model Not usually handled like a Bluetooth pen Use the compatible device’s pen or Bluetooth settings if the device exposes them. On many Chromebooks, compatibility is device-side. Do not try to pair it like a normal Bluetooth accessory on Chromebooks.
Surface Pen Not a normal on/off switch Yes Use the Surface device’s Bluetooth settings to disconnect or remove it. For pairing mode, hold the top button for about 5 to 7 seconds until the LED flashes continuously. Do not treat the flashing LED as proof that the pen is powered off.

How do you turn off a stylus pen?

How do you turn off a stylus pen?
Several stylus pens and replacement tips are arranged on a white background

Start by identifying the pen type. Most stylus pens have nothing to turn on. Passive capacitive pens have no battery and no switch, so they stop responding only when they leave the screen. Active and Bluetooth pens may need a button press, a battery action, or a device-side disconnect.

Passive capacitive stylus

A passive capacitive stylus has no battery and no switch. It works because a capacitive screen detects an electric field change. To stop it, just remove it from the screen. If it still seems to draw, the issue is usually another active pen, a screen touch point, or a stuck touch input.

Active rechargeable stylus

An active pen contains electronics, so it needs power. Many active pens have a button, an LED, or both. If your model has a power button, use that first. If it charges by USB-C or uses a replaceable battery, check the battery or charging state when the pen will not shut down.

Battery-powered stylus

If the model uses a replaceable battery, remove the battery only if the manufacturer allows it. Otherwise, use the button sequence in the manual and let the pen sleep on its own. A low-power indicator usually means the pen needs a charge or a battery change, not a special shutdown mode.

Surface Pen power and pairing behavior

For a Surface Pen, do not assume the top button is a power switch. Microsoft says to hold the Surface Pen top button for about 5 to 7 seconds when you want pairing mode. The LED flashes continuously when it is ready to pair, which means it is waiting for a connection, not powering off.

Apple Pencil power behavior

Apple Pencil behavior depends on the generation and iPad model. Apple Pencil 2nd generation has no power button. For Apple Pencil Pro and the 2nd generation, Bluetooth is involved. To stop it from staying linked, remove it from Bluetooth on the iPad.

Samsung S Pen power behavior

Samsung says many S Pens do not need pairing like traditional Bluetooth devices, and some S Pens have no Bluetooth features at all. On many models, pulling out the pen activates it. If your model supports Bluetooth Low Energy, use the device’s pen settings or Bluetooth list to disconnect it.

USI stylus power behavior

USI is an open stylus standard used across compatible devices, including some Chromebooks. Google notes that some Chromebooks are compatible with USI styluses, and Google also says Bluetooth styluses cannot be used with Chromebooks. On these devices, stop input through the device’s pen or compatibility settings, not a Bluetooth menu.

How do you disconnect a stylus pen?

How do you disconnect a stylus pen?
A stylus rests beside a smartphone on a wooden table

Use the device settings, not the pen body, when the goal is to stop an existing connection. The exact path differs by platform. If the stylus is Bluetooth-based, forgetting or removing it from the device list is the clearest way to keep it from reconnecting on its own.

Remove a Bluetooth stylus from Windows

  1. Open Settings > Bluetooth & devices > Devices.
  2. Select the pen from the device list.
  3. Choose Remove device or Forget.
  4. Turn Bluetooth off briefly if the pen reconnects before you finish.

Remove a Bluetooth stylus from iPadOS

  1. Open Settings > Bluetooth.
  2. Find the Pencil or stylus in My Devices.
  3. Tap the info button if shown, then tap Forget This Device.
  4. Re-pair only if you want the stylus linked again.

Disconnect a Surface Pen from Surface Pro

  1. Open Settings > Bluetooth & devices > Devices on the Surface Pro.
  2. Select the Surface Pen.
  3. Choose Remove device.
  4. If you only need to stop the current link, turn Bluetooth off and back on after the pen is removed.

Stop Apple Pencil from staying linked

  1. Open Settings > Bluetooth on the iPad.
  2. Find the Apple Pencil in the device list.
  3. Choose Forget This Device.
  4. Reattach the Pencil to the iPad only if you want to pair it again.

Check Samsung tablet pen settings

  1. Open Settings > Connections > Bluetooth or Settings > Advanced features > S Pen, depending on the model.
  2. Look for the connected pen or Air Action entry.
  3. Choose Unpair, Disconnect, or remove the entry if the menu offers it.
  4. If your S Pen has no Bluetooth feature, leave it seated or store it away from the screen.

Handle USI pens on compatible devices

  1. Open the device’s pen settings or accessibility settings.
  2. Turn off pen input features if the device offers them.
  3. If the pen is still active, restart the device to clear a stuck pen session.
  4. Check the owner’s manual if the device uses a vendor-specific pen menu.

Do all stylus pens have an off button?

No. Many stylus pens are reported to have no off button at all. Passive capacitive styluses always fall into that group. Some active pens sleep automatically, and some pens depend on the tablet or laptop to manage the connection. In those cases, there may be nothing to switch off on the pen itself.

Pens with no switch

Passive capacitive styluses have no battery and no switch. They are active only when they touch a compatible capacitive screen. If the pen has no button, no light, and no charging port, it is probably meant to be used without any off control.

Pens that sleep automatically

Many active pens stop drawing after they idle for a while. That is sleep behavior, not a manual off command. If the pen wakes only when picked up or touched to the screen, let it idle and then confirm that the device no longer shows it as connected.

Pens that need charging instead of switching off

If the pen still drains power, the fix may be charging, not shutdown. The same source notes that charging an S Pen can take about 40 seconds inside the phone on supported models. For other pens, use the charger or replace the battery as the model requires.

Common mistakes

People often mistake pairing mode for power off. A flashing LED can mean the pen is ready to pair, not that it is shut down. Another common error is unplugging a cable and assuming that ends the connection. It may only stop charging.

Another problem is changing a software setting without removing the pen from the Bluetooth list. That can leave the pen able to reconnect later. A fourth mistake is ignoring tip wear or loose seating. A worn tip can create phantom input that looks like a stuck stylus.

Say your Surface Pen LED flashes after holding the top button. That means pairing mode is active, so the next step is Bluetooth removal on the Surface Pro, not more button presses. Suppose an Apple Pencil keeps showing as connected after it is attached and detached. Remove it from Settings > Bluetooth instead of assuming the cable or magnet solved it.

Keep reading

Frequently asked questions

How do I turn off a stylus pen on Surface Pro?

Open Settings > Bluetooth & devices > Devices on the Surface Pro, select the Surface Pen, and choose Remove device. If the pen is in pairing mode, Microsoft says the top button hold is about 5 to 7 seconds and the LED flashes continuously when it is ready to pair.

How do I turn off an HP stylus pen?

Check the model first, then use its button or battery method if it has one. If it pairs by Bluetooth, open Settings > Bluetooth & devices > Devices on the PC or tablet and remove it from the list. If the model has no switch, it may be designed to sleep automatically.

How do I turn off a Lenovo stylus pen?

Use the model’s manual or device settings, because Lenovo pens vary by device family. If the pen is Bluetooth-based, remove it from Settings > Bluetooth & devices > Devices. If it is a passive pen, there is no off action on the pen itself, only stopping contact with the screen.

How to turn off stylus pen amazon fire hd

On compatible Fire HD setups, start with the tablet’s Bluetooth settings if the stylus model uses Bluetooth. Open Settings > Wireless & Bluetooth > Bluetooth on the tablet, then remove the pen if it appears there. If the stylus is passive, there is no off control on the pen itself.