A Xiaomi hard reset usually means holding Power and Volume Up into Recovery, then choosing Wipe data; use Fastboot only for a reboot, and use Recovery or Find Device when you need a full erase. Get it wrong and you can lose data, leave the phone stuck, or trigger Mi Account lock after reset. This guide shows the right reset path for locked, frozen, bootlooping, and Fastboot-stuck Xiaomi phones, plus the account-lock risks before you wipe.
Xiaomi reset decision table
Use the phone’s state to pick the method before you touch any wipe option. If the phone still opens and the screen lock is known, Settings is the cleanest path. If it will not boot, Recovery is the usual on-device path. Fastboot is a service mode for PC-assisted flashing or recovery work, not the normal place for a factory reset.
| Phone state | Correct reset method | What buttons or tools to use | What lock or data-loss risk to expect |
|---|---|---|---|
| Open phone | Settings factory reset | Settings > About phone > Factory reset; keep battery at least 50% | Deletes all local data; Google account lock may still appear after reboot |
| Forgotten PIN or pattern | Recovery wipe | Power + Volume Up for about 10 seconds, then Wipe Data > Wipe All Data > Confirm | All phone data is erased; Mi Account lock or FRP can still require sign-in |
| Stuck on logo or bootloop | Recovery wipe first | Recovery mode, volume keys to move, power to confirm | May still boot back into Recovery if the wipe fails or system files are damaged |
| Phone opens Fastboot instead of Recovery | PC-based Fastboot recovery path | Power + Volume Down for about 10 seconds, Windows PC, ADB drivers, original USB cable | Not a simple on-device reset; data loss is likely and bootloader/authorization limits can block repair commands |
What a hard reset does and does not do
A hard reset and a factory reset both erase local data, but they are not the same as a normal restart. A restart just turns the phone off and back on. A factory wipe clears apps, photos, downloads, accounts stored on the device, and other local content.
That wipe does not automatically remove Google FRP or Xiaomi anti-theft protection. Google’s FRP help materials explain that a reset device may still require the previously synced Google account. Xiaomi’s account and Find Device support likewise keeps anti-theft protections tied to the signed-in Xiaomi account when they were enabled.
Battery charge matters because a wipe that dies halfway can leave the phone stuck at the logo or back in Recovery. Start with at least 50% battery. If the phone is already unstable, plug it in first and wait a few minutes before starting.
Which reset path should you use?
The best path depends on whether the phone still opens Android, whether you know the screen lock, and whether the phone is booting at all. If the phone opens, use Settings. If the screen lock is forgotten or Android will not start, move to Recovery. If the key combo lands in Fastboot, that is a different mode and usually points to a PC-assisted recovery workflow.
Open phone: use Settings
When the phone still opens, the Settings route is the simplest and least error-prone. It is also the safest way to wipe before selling or handing the phone to someone else, because you can confirm account removal and backup settings first.
Forgotten PIN or pattern: use Recovery mode
If the phone is locked and you cannot get into Settings, Recovery is the usual answer. A recovery wipe does not need Android to start, which makes it the main path for a forgotten PIN or pattern.
Bootloop or logo freeze: use Recovery mode first
When the phone keeps restarting or hangs on the Mi or Redmi logo, Recovery is the first reset path to try. Xiaomi support guidance for Recovery/boot behavior notes that first boot after a wipe can take several minutes; on many devices, 3 to 7 minutes is normal. If it loops back into Recovery, the system partition may need service-level repair.
Fastboot opens instead of Recovery: what that means
If Power + Volume Up does not open Recovery and the phone instead shows Fastboot, the button combo or firmware state has sent it into a different service mode. Fastboot is not Recovery mode. According to Xiaomi recovery and flashing guidance, Fastboot is mainly used with a PC for flashing or repair tasks, while normal factory reset is usually done in Recovery or Settings.
How to factory reset from Settings
If the phone still opens, use the built-in factory reset menu in HyperOS or MIUI. Xiaomi factory reset can be done through HyperOS or MIUI settings. Menu wording varies by version and device family: some builds show About phone first, while others place the reset option under Additional settings or a similar system menu. Copy photos to a computer or cloud storage, save chat backups, and move downloads you want to keep, because the erase removes local data and signed-in accounts from the device.
- Open Settings.
- Tap About phone.
- Choose Factory reset or the reset option shown on your firmware.
- Review the data warning screens.
- Confirm the erase and wait for the reboot.
Suppose a 128 GB Redmi phone still opens but keeps crashing in one app. The Settings path is the cleanest way to wipe it, because you can back up first, then erase without fighting the lock screen.
How to hard reset in Recovery mode
Recovery mode is the usual answer when Android will not boot. Open it with Power + Volume Up for about 10 seconds. Xiaomi and Redmi/POCO model families may label Recovery slightly differently, but the navigation pattern is the same: volume keys move through the menu and the power button confirms a choice. That is the standard Xiaomi navigation pattern.
- Power the phone off completely.
- Hold Power + Volume Up for about 10 seconds.
- When Recovery appears, use Volume keys to highlight items.
- Press Power to confirm Wipe Data.
- Select Wipe All Data.
- Choose Confirm and wait for the wipe to finish.
Wipe Data, then Wipe All Data, then Confirm is the factory erase path in Recovery. It deletes all phone data. Xiaomi support documents also note that first boot after a reset can take several minutes, so do not interrupt the startup if the logo stays up briefly. If the phone returns to Recovery after reboot, repeat the wipe once only after checking battery charge and storage health. A failing wipe can point to deeper firmware damage.
A common first-timer mistake is pressing Power + Volume Down and expecting Recovery. That usually opens Fastboot instead. If that happens, power off and try Power + Volume Up again, holding both keys for the full press.
How to reset from Fastboot mode
Fastboot is not Recovery mode. It opens with Power + Volume Down for about 10 seconds and is used for service commands, not the normal wipe screen. Xiaomi’s own support and community guidance treat Fastboot mainly as a PC-assisted flashing or recovery state, while standard factory reset is done from Settings or Recovery. For most users, Fastboot is a sign that a computer-assisted repair path may be needed rather than a simple button wipe.
Fastboot reset guidance typically requires a Windows PC, ADB drivers, and an appropriate USB cable. However, having USB debugging enabled earlier does not automatically make a generic reset command work in Fastboot. Fastboot authorization, bootloader state, and the specific repair task all matter. Without the right permissions or an unlocked bootloader, the phone may be visible to the PC but still refuse the commands needed for recovery work.
- Confirm the phone is in Fastboot.
- Connect it to a Windows PC with the original USB cable.
- Install the correct ADB drivers if Windows does not detect the device properly.
- Open a command window from the platform-tools folder.
- Use the required fastboot command for the repair task.
Fastboot is not the right place for a normal on-device factory reset. If the phone only reaches Fastboot, the next step is usually a PC-assisted repair or a service visit, especially if the bootloader is locked or the phone was never authorized for Fastboot-level commands.
Google and Mi account lock after reset
After a wipe, the phone may still ask for a previously synced Google account. That is FRP, or Google account lock, and it is separate from the screen lock you used before the reset. Google’s FRP help pages explain that the device can ask for the prior account to protect it after a reset. Mi Account lock or anti-theft can also stay active on Xiaomi, Redmi, and POCO devices if Find Device or account protection was enabled.
Before the first boot, have the Google account email and password ready if the device was signed in before. Also have the Xiaomi account password if Mi Account protection was active. Xiaomi account and Find Device support indicates that account verification may be required after a reset or when anti-theft protections are turned on. If those credentials are not available, the reset can finish but the phone may still stop at the verification screen.
Likely causes
Most often, the problem is that the phone was reset without removing the signed-in accounts first. Less commonly, the recovery wipe was incomplete, the wrong button combo opened Fastboot, or the device is asking for a Xiaomi anti-theft check because Mi Account protection was enabled.
Cause 1: FRP or Google sign-in is required
- At first boot, connect to Wi-Fi.
- Enter the same Google account previously synced to the phone.
- Use the password that was on the device before the reset.
- If the password was changed recently, wait through Google’s security delay before trying again.
Cause 2: Mi Account lock is active
- Stay on the Xiaomi sign-in or verification screen.
- Enter the Xiaomi account email or phone number tied to the device.
- Enter the correct Mi Account password.
- If the account is unavailable, stop there and contact Xiaomi support or the seller’s service channel.
Cause 3: The wipe did not finish cleanly
- Power the phone off.
- Return to Recovery with Power + Volume Up.
- Run Wipe Data > Wipe All Data > Confirm again.
- Wait through the reboot for 3 to 7 minutes before judging the result.
Frequently asked questions
How to hard reset xiaomi phone forgot password
If the password is forgotten, use Recovery rather than Settings. Power off the phone, hold Power + Volume Up for about 10 seconds, then choose Wipe Data, Wipe All Data, and Confirm. That erases local data, and the phone may still ask for the previous Google or Mi account at first boot.
How to hard reset redmi phone no command
If a Redmi phone shows a no-command style recovery screen, keep using the Recovery path rather than the Fastboot path. Try Power + Volume Up again from a full power-off state, then use volume keys to reach Wipe Data. If it keeps returning to the same screen, the firmware may need service repair.