To turn off Bluetooth on a Logitech keyboard, use the power button to switch it off; if it has no switch, end pairing mode by holding the Bluetooth or Easy-Switch key until the light stops flashing, then remove the device from your phone or computer. Skip the right step, and the keyboard can stay discoverable, drain its battery, or reconnect to the wrong device. This guide shows the exact off, unpair, and power-down steps for K380, MX Keys Mini, MK850, and similar multi-device models.

What you need before you start

What you need before you start
Close-up of a Logitech keyboard with highlighted Bluetooth keys
  • The Logitech keyboard you want to stop pairing or power down.
  • The computer, tablet, or phone that shows the keyboard in its Bluetooth settings.
  • Fresh batteries, charged battery, or a charging cable if your model needs power.
  • A clear view of the keyboard edge, where the power switch is usually located.
  • Access to the keyboard’s model name, if the controls are not obvious.

Check that the keyboard is powered

Look for the green LED that lights when the keyboard is on. If there is no light, the keyboard may be off, out of battery, or still blocked by a switch on the edge.

Confirm batteries or charging status

If the keyboard does not respond, check that the batteries are installed correctly or that the rechargeable model has enough charge. A dead keyboard will not enter pairing mode or stay connected long enough to finish setup.

Remove any battery spacer if your model shipped with one

Some new Logitech keyboards ship with a battery compartment spacer that must be removed before normal use. If the keyboard seems dead straight out of the box, open the compartment and confirm that nothing is blocking the batteries.

Open Bluetooth settings on the device you want to connect

Use Bluetooth settings on Windows, macOS, tablet, or phone. That is where the keyboard appears in the device list after pairing starts.

How Logitech Bluetooth controls actually work

Most Logitech keyboards do not have a software switch that turns Bluetooth off by itself. The usual control is physical: power the keyboard off, leave pairing mode, or move to another saved device with Easy-Switch. Logitech keyboards can switch between devices without re-pairing, and some models can connect to multiple devices at once.

Power switch

The power switch is usually on the edge of the keyboard. Turning it off shuts down the whole keyboard, which disconnects every link at once.

Easy-Switch buttons

Easy-Switch buttons choose a paired device on multi-device Logitech keyboards. On many models, holding one for about 3 seconds starts pairing mode and a blue light can flash.

Dedicated Bluetooth key

Some newer layouts use a Bluetooth key instead of a separate connect button. That key usually starts pairing, not a true Bluetooth-off state.

When there is no Bluetooth-off control

If your keyboard has no dedicated off control for Bluetooth, you usually cannot disable Bluetooth alone. You can power off the keyboard, switch to another paired slot, or remove the keyboard from the host device’s Bluetooth list.

Which control do you use on your model?

Which control do you use on your model?
A black Logitech keyboard with labeled function keys is shown close up

Use the control your layout actually has. K380-style compact keyboards often rely on Easy-Switch keys. MX Keys Mini-style boards often use a dedicated Bluetooth or Easy-Switch control. MK850-style full-size multi-device keyboards typically use Easy-Switch and a power switch. K270 is a 2.4 GHz Logitech keyboard, so it does not follow the Bluetooth steps in this guide.

K380 and similar compact multi-device keyboards

Use an Easy-Switch key to select a saved device, or hold it to start pairing. There is usually no separate Bluetooth-off switch. To stop a connection, switch to another slot or power the keyboard off if your model has a switch.

MX Keys Mini and similar rechargeable layouts

Use the Bluetooth or Easy-Switch control to pair, then use the edge power switch to shut the keyboard down. If the keyboard keeps flashing, the host device may still be waiting in Bluetooth settings.

MK850 and full-size multi-device keyboards

Use the numbered Easy-Switch keys to move between saved devices. If you want everything off, use the power switch. If you only want to stop one device from reconnecting, remove it from that device’s Bluetooth list.

What to do if your model differs

Check the model name on the keyboard label or in the manual. If the layout has no obvious Bluetooth control, use the power switch and the host device’s Bluetooth settings instead of guessing.

Off bluetooth logitech keyboard table

Common Logitech layout Control to press or hold What the action does If the light keeps blinking
K380-style compact multi-device keyboard Easy-Switch key Selects a paired device; a 3-second hold starts pairing mode Open Bluetooth settings and remove the keyboard, then hold the key again
MX Keys Mini-style rechargeable keyboard Bluetooth or Easy-Switch control Starts pairing mode; does not always power off the keyboard Turn the keyboard off, then reopen Bluetooth settings and try again
MK850-style full-size multi-device keyboard Easy-Switch key or power switch Switches between saved devices or powers the keyboard down Delete the keyboard from Bluetooth settings and re-pair it
Logitech keyboard with no Bluetooth-off control No separate Bluetooth-off control Bluetooth stays managed by pairing state and host-device settings Power the keyboard off, or clear the entry in Bluetooth settings

How do you turn on Bluetooth pairing on a Logitech keyboard?

Hold the Easy-Switch or connect control for about 3 seconds, then watch for the blinking indicator. After that, pick the keyboard in Bluetooth settings on your computer, tablet, or phone and let the device finish pairing. Most Logitech setup flows use five steps, and step 3 is to continue pairing on the computer.

  1. Turn the keyboard on with the power switch.
  2. Press and hold the Easy-Switch or Bluetooth key for about 3 seconds.
  3. Watch for the blue light to flash.
  4. Open Bluetooth settings on the host device.
  5. Select the Logitech keyboard from the device list.
  6. Follow the on-screen pairing prompt if your device shows one.

Say your K380 starts blinking after a 3-second hold, but it does not appear on your phone. Remove the keyboard from the phone’s Bluetooth list, then start pairing again from the same Easy-Switch key. That clears a stale entry without changing the other saved slots.

How do you turn off Bluetooth on a Logitech keyboard?

Most of the time, you cannot switch off Bluetooth alone. The practical options are to power the keyboard off, leave pairing mode, or remove the keyboard from the computer or phone that remembers it. That stops reconnection without wiping every saved device slot on every model.

  1. Use the power switch on the edge of the keyboard to shut it off.
  2. If the keyboard has no separate switch, stop pairing by pressing the same Easy-Switch or Bluetooth key again.
  3. Open Bluetooth settings on the phone or computer and remove the Logitech keyboard from the device list if you do not want it to reconnect.
  4. Turn the keyboard back on and test the saved slots if one device still keeps reconnecting.

Suppose an MK850 keeps reconnecting to a laptop you no longer use. Powering it off will stop everything, but the laptop may still remember the keyboard. Removing the keyboard from Bluetooth settings on that laptop stops the return pairing attempt.

Common mistakes

Common mistakes
A Logitech keyboard is shown with large text beneath it
  • Assuming every Logitech keyboard has a true Bluetooth-off toggle. Many do not.
  • Confusing power off with unpairing. Powering off stops the keyboard; it does not always erase saved pairings.
  • Looking for a pairing code on the keyboard itself. Modern Logitech keyboards usually pair from the device list without manual code entry.
  • Skipping the battery check. A low battery can look like a Bluetooth problem.
  • Forgetting the host device. If the keyboard keeps showing up again, remove it from Bluetooth settings there too.
  • Ignoring model differences.

If that didn’t work, try this next

  1. Open Bluetooth settings on the host device and forget the keyboard.
  2. Turn the keyboard off with the edge power switch.
  3. Wait a few seconds, then turn it back on and re-enter pairing mode.
  4. If the light still flashes, check the model’s manual for its exact Easy-Switch behavior.

Logi Options+ is the companion app for customization on supported models. It is available for Windows 10 or later on Windows and macOS 10.15 or later on Mac. Use it for remapping and other keyboard settings, not for a universal Bluetooth-off switch.

Keep reading